Trident Marine LPG Single Stage Regulator w/Gauge

Trident Marine LPG single stage regulator with gauge for low pressure LPG systems not exceeding 300 psi. This compact regulator is constructed of UL listed die cast zinc and is designed to be mounted directly to LPG tank.

Regulator and gauge have been leak tested and meet ABYC standards. Tank fitting is solid brass with 3/8 inch male POL cylinder threads. Other end accepts a 3/8" NPT fitting. Regulator pressure gauge is of water tight, low profile construction and made of corrosion resistant stainless steel.

Info & Guides

Gauged unit enables ABYC Marine LPG System Leak Test

Test for system leakage each time the cylinder supply valve is opened for appliance use.

Close all appliance valves.
Open solenoid valve if installed.
Open, then close cylinder supply valve.
Observe pressure gauge at the regulating device and see that it remains constant for not less than three minutes before any appliance is used.
If any leakage is evidenced by a pressure drop, check system with a leak detection fluid or detergent solution which does not contain ammonia and repair before operating system.

Recommended Products