Free shipping on orders over $99.99! Don't miss out!

Festool StickFix Rubin-2 6 Inch Discs for RO 150 and ETS 150 Sanders

$15.50Out of StockSee Product Details
Festool StickFix Rubin-2 6 Inch Discs for RO 150 and ETS 150 Sanders
StickFix logo

This item is eligible for free shipping on orders over $99.99
This item will require additional time to ship

Product Details

Festool Rubin 2 Abrasives for the 6" Festool Rotex RO 150 E dual-mode sander and ETS 150/3 EQ and ETS 150/5 EQ random orbital sanders.

The six inch Rubin 2 abrasive discs now feature the next generation Multi-Jetstream design that incorporates a modified (17) hole pattern that increases airflow, and results in even better dust extraction efficiency. In addition, the new pads incorporate an enhanced, heat-resistant StickFix design, extending both pad and abrasive life considerably.

The new Multi-Jetstream design is 100% compatible with the previous pad design, and vice-versa. The new abrasives work seamlessly with the old pads, and the old abrasives are adaptable to the new pads.

StickFix is the Festool brand name for hook and loop (H&L) sandpaper.

Available in 40, 60, 80, 100, 120, 150, and 180 grit 6 inch discs. Quantities are shown below.

Tech Specs
Item Number Grit Quantity
FES-575178 P4010/bx
FES-499117 P40 50/bx
FES-499118 P60 50/bx
FES-499111 P80 10/bx
FES-499119 P80 50/bx
FES-499112 P100 10/bx
FES-499120 P100 50/bx
FES-499113 P120 10/bx
FES-499121 P120 50/bx
FES-499114 P150 10/bx
FES-499122 P150 50/bx
FES-499115 P180 10/bx
FES-499123 P180 50/bx
Rubin 2 ApplicationsSuggested GritProcess Level
WoodP24 - P60heavy duty
WoodP80 - P120intermediate
WoodP150 - P180prep for finish
Info & Guides

Rubin 2 abrasive was developed for bare natural wood, wood composites and veneers. Rubin has a special coating which sheds wood fibers. Use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products.

Tip

Use coarser grits for faster results; avoid skipping grits for best surface quality. The wood-specific coating for the Rubin abrasives means that they are long lasting.

Technical Information

  • Use grits P24 to P60 for rapid removal and rough surface quality. High material removal means low surface quality. This preps surfaces for higher grits.
  • Use grits P80 to P120 to accomplish intermediate sanding. You will still have a fast removal rate while achieving good surface quality.
  • Use grits P150 to P180 for finish sanding. Remember that soft wood does not require as fine a sanded finish as hardwood. If you want to sand wood higher than P180, use Brilliant 2 from P220 +