Get Free Shipping on your order now! Don't miss out!
Only 1 left
1 ea contains 1 ea

This item is eligible for free shipping

Product Details

Sea-Hawk Gel Coat features excellent weather resistance, resistance to water blistering, prolonged hull-life expectancy, and a great look. It can be used to patch, re-gel coat, or repair.

Chemical resistant Isophthalic NPG gel coat meets the rigid requirements of a variety of applications including boating, transportation, and sanitation. Recommended application thickness is between 16-20 mils to allow for considerable water sanding, compounding and repolishing.

Each quart and gallon of Gel Coat includes a tube of wax additive and MEKP catalyst, except for Snow White Gel Coat #8115 quart and gallon, which include MEKP catalyst only.

Tech Specs
Dry Times & Overcoating Intervals
Substrate Temperature Overcoating Sand/Compound Maximum
73°F (23°C)2 hours12 hoursNot Critical
95°F (35°C)1 hour6 hoursNot Critical
Info & Guides
NOTE: Due to computer monitor color calibration differences, color swatches may not accurately represent the actual paint color.

Technical Information

Features & Benefits

  • Premium marine grade gelcoat
  • Ready to use, easy to spray, sag resistant
  • High gloss retention
  • Excellent weatherability and chemical resistance
  • Resistance to water blistering

Product Information

  • Sizes: Quart, Gallon
  • Finish/Sheen: Gloss
  • Shipping Weight: 9-11 Lbs/Gal (Depending on color)
  • Flash Point: 82-88°F
  • VOC: 35-42%
  • Typical Film Thickness: 18 millimeters (+/- 2 millimeters)
  • Catalyst Level (MEKP): 1.2% minimum - 3.0% maximum
  • Gel Time at 1.8% MEKP Catalyst at 77°F: 10-17 minutes
  • Theoretical Coverage: Approximately 48-52 Sq. Ft./Gal. at typical film thickness
  • Storage: Avoid prolonged exposure at temperatures above 85°F and exposure to direct sunlight. Increased storage temperatures will negatively effect shelf life. Store in a cool place.
  • Shelf Life: 120 days when stored under cool, dry conditions.
  • Application Method: This product may be applied by airless and conventional spray, solvent resistant rollers and brushes for small areas only.

Reviews for Sea Hawk Gel Coat

2 of 2 Reviews

May 11, 2015

Got the wrong stuff!
By Barnacle Bill from Silverdale, Washinton

Verified Purchase

The gel coat was fine. Great stuff. Exactly what I needed. It didn't, however, show up on the first try. I got some gray paint that was supposed to go to a poor guy in Kentucky. Maybe he got my gel coat, I don't know. What I do know, though, is that when I called JD and informed them of my sadness, they told me to keep the paint and fired off another quart of gel coat post haste. It's here now and I'm eager to use it.

Bottom Line Yes, I would recommend to a friend

Was this review helpful to you?

April 8, 2015

Directions not good
By anthony from Atlanta ga

Verified Purchase

The product was supposed to be a quart I only got 24oz not 32oz not happy abou that. Other products I have purchased in the past (HI bond) would tell you add .5 oz of hardner based on ideal temperatures. They took the math out of it. When you are using 16oz at a time it can make complicated. I like hi bond much better in this department. If hi bond came in different colors I would have bought it.

Bottom Line No, I would not recommend to a friend

Was this review helpful to you?