This item is eligible for free shipping
TotalBoat Glass Microballoons make for a great low-cost, low-density filler. They are white, hollow, and made of sodium borosilicate. To prevent sagging, Silica Thickener may also be combined with the microballoons.
To prepare for use, start by thoroughly mixing your resin/hardener. Then add in TotalBoat Glass Microballoons and your bulking agent. Blend well. TotalBoat Silica Thickener may then be added if applicable. ALWAYS remember to stir from the bottom to the top.
Reviews for TotalBoat Glass Microballoons
Verified Purchase
Worked well in conjunction with silica thickener.
Was this review helpful to you?
Verified Purchase
Worked well with a rudder repair. Time will tell if it added durability to the repair.
Was this review helpful to you?
Verified Purchase
works great, easy to sand. only objection is the packaging needs a more secure lid.
Was this review helpful to you?
Verified Purchase
Used as a fairing compound and found it good to work with although, a bit difficult to sand.
Was this review helpful to you?
Verified Purchase
I used the product to thicken the epoxy I was putting on so that I could slope it. It got thicker but I did not use enough and it still ran. Apparently, you have to use quite a bit to get it to thicken and become more solid than liquid but still pliable. Instructions would have been helpful. It makes it easier to sand but not by much. The epoxy is so hard, I had to use a grinder disk on my oscillator to lower some high spots.
Was this review helpful to you?
Verified Purchase
Just as described, worked as advertised
Was this review helpful to you?
Verified Purchase
I used it for a small underwater leak around a fitting.
Was this review helpful to you?
Verified Purchase
It works really well
Was this review helpful to you?
Verified Purchase
Worked good, a bit hard to mix, adding epoxy on top of the product helps, mix from bottom.
Was this review helpful to you?