This item is eligible for free shipping on orders over $99.99
TotalBoat Seal is a fast-curing elastomeric marine sealant that adheres tenaciously to fiberglass, wood, metal, glass, Starboard & vinyl. It creates a highly elastic waterproof seal ideal for bedding hardware, windshields, and portholes, as well as flush & overlapping joints. Once cured, Seal is paintable and sandable.
Seal is highly UV stable and will not sag on vertical surfaces. It boasts superior properties over most leading sealants including strength, adhesion, elongation, and shelf life. For use above and below the waterline. Do not use on wood deck seams.
Available in White only. Choose from a 3 oz. tube, 10 oz. cartridge, or 6-pack of 10 oz. cartridges. Cartridges fit standard 290ml caulk guns.
Important: TotalBoat Seal is designed for bedding and sealing, and does not have the strength properties of bonding adhesives.
|TB-SEALWHT3OZ||3 oz. tube||White|
|TB-SEALWHT||10 oz. cartridge||White|
|TB-SEALWHT6||Six 10 oz. cartridges||White|
|For Use on these Surfaces||Fiberglass, metal, wood, vinyl, glass, and StarBoard|
|Non-conductive?||Yes. Suitable for use on electrical connections.|
|Is Priming Necessary?||No|
|Suitable for Use on Teak Deck Seams?||No. Do not use on teak deck seams.|
|Full Cure||1-7 days, depending on temperature and joint depth.|
|Shelf Life||3 years from date printed on tube|
Additional Features & Information:
Be sure to read all safety information on the label and in the SDS (safety data sheet) before using this product. Ensure adequate ventilation, especially in confined areas. Eyes: Wear safety glasses with side shields (or goggles). Avoid contact with eyes. Skin: Wear protective gloves. Use in a well-ventilated area. When using, do not eat, drink or smoke. Wash hands thoroughly after handling the material. Routinely wash work clothing and protective equipment to remove contaminant. Keep out of reach of children!
October 21, 2021
I used this TotalBoat Seal to afix my cover board on my center board trunk. I had used some sort of silicon previously and had some water splashing through in rough seas.I didn't want to use 5200 as I feared it would be too permanent. In truth, I haven't tried to remove the cover board and hope to not need to anytime soon but it applied nice and neat and somehow I didn't get it all over myself which is pretty much SOP with 5200, Ha!
September 5, 2021
Set up time is very fast . Was starting to dry while setting my windo in
August 4, 2021
VERY short working time. Not good for large pieces, like windows. Ask me how I know...
July 3, 2021
I used this to re-bed the glass on an aluminum frame diamond sea glaze window. It bonded exceptionally to the frame and the glass.
June 26, 2021
The product seems to do a good job sealing but it takes a LONG time to cure.
May 21, 2021
Finally a product that bonds/seals Starboard material. Easily applied like any other sealant BUT plan accordingly and work quick as product sets up fast (can make cleanup more difficult for that "finished" look. Smooth your beads as you go for best results.
May 4, 2021
I bought to reseal window that were leaking. I had a total of about 3 linear feet. By the time I got all the way around the window, it was already skinning over. That's good and bad. It's good that is will setup quick, but make sure you are prepared. Once you start you can't stop in the middle (like you might with silicon). The product seems to adhere well and I only gave 4 stars because it's only been a month - no leaks so far - hopefully good for another 10 years. Tape off around area and use soapy water on finger to smooth out. It will be pliable and workable for a very short window. Just have everything ready. Definitely not for someone who doesn't have caulking experience.
January 24, 2021
It is easy to use, spreads out, and fills spaces openings around fasteners. it dries and sets up firm but gives time to make a seam smooth with a lite fingertip pull. A cauk gun tube goes father than expected so don't cut the tip off for too large an opening.
September 3, 2020
I used it to seal a new transducer for my depth finder was just the right consistency dried overnight I've had nothing but good luck with Jamestown products
August 17, 2020
We used this to create a seal between the teak toe rail and fiberglass deck on our Tartan 34C. In the past, we've had trouble with water getting under the film of the varnish coating resulting in large sections peeling off. We hope that this will prevent that in the future. We were working in 90+ weather and the caulk set so quickly that we were able to paint over in an hour or so.
Phasellus suscipit tincidunt tristique. Quisque mattis euismod ipsum, ac accumsan ante fermentum non. Vestibulum eget auctor lorem. Integer euismod justo nulla, nec ultricies ipsum pulvinar in. Duis sed fringilla turpis, at ultricies orci. Nam est turpis, consequat nec feugiat a.
Praesent sodales et ipsum
Mauris congue justo sit amet lacus sagittis, a tempor lectus tempus. Suspendisse quis nulla ac nibh accumsan tincidunt ac quis tortor. Proin dignissim aliquam odio, sed bibendum urna sagittis dapibus. Aenean ut tristique ante, sit amet ultrices nisi. Praesent eu dapibus augue. Mauris tempus suscipit ipsum, et malesuada tellus euismod eu. Quisque consequat turpis id feugiat lacinia. Vestibulum sit amet elementum augue. Quisque tempus ligula vitae placerat pulvinar. In egestas sodales lorem, id egestas lacus pharetra eget. Sed ac mi placerat, placerat nulla ut, imperdiet nunc. Mauris at felis vehicula, commodo est eu, ullamcorper purus.