Step 1 - PREPARE:

• Scrape the point of a pin along the crack or scratch to remove any dirt or grime.
• Allow the area to dry fully in the sun or use a hairdryer to expedite drying.
• For even consistency, rotate the tube between your palms or shake the tube for 30 seconds.

Step 2 - APPLY and LEVEL:

• With a tissue handy, apply two drops of Hairline Fix into the crack.
• Note: For plastic and aluminum surfaces, see repair tips below.
• Note: To repair damage to vertical surfaces, see repair tips below.
• Turn the tube around and wipe the 'level' end rapidly across the repair five times so the Hairline Fix can penetrate the crack deeply.

Step 3 - TRIM:

• Use the tissue to wipe off the 'level'; use the 'level' to trim surface smears around the repair, taking care not to touch the repair itself.
• Deeper cracks may require several coats of Hairline Fix to repair completely. Let the repaired area set at least 2 hours between applications (overnight is best).

Step 4 - LET DRY:

• Dry times vary, but normal dry time is two hours at 70 degrees F/20 degrees C.
• Allow repair to harden overnight; achieve maximum durability and adhesion after 14 days.