This item is eligible for free shipping on orders over $99.99
TotalBoat Envy 2 Part clear varnish system brings a truly modern approach to brightwork. Its low-VOC, high-solids formula features superior UV, abrasion, and chemical resistance for an ultra clear, flexible finish that lasts 5 times as long as conventional varnishes.
Exceptional self-leveling properties and little or no sanding between coats let you achieve professional results whether you apply by spray, brush, or roller. Envy works great on bare wood, as well as over other 2-part varnishes. Available in High Gloss and Satin.
Bonus: Buy a quart kit and receive 2 plastic paint pots, 2 wooden stir sticks & 2 foam brushes (a $10 value).
Sold separately is Envy Brushing Reducer, formulated to improve flow characteristics. This multi-use solvent is also a surface prep cleaner, and can be used to clean equipment.
WARNING: TotalBoat Envy Brushing Reducer can expose you to chemicals including naphthalene, which is known to the State of California to cause cancer. TotalBoat Envy Gloss and Satin Varnish bases can expose you to chemicals including methyl isobutyl ketone, which is known to the State of California to cause cancer & reproductive toxicity. TotalBoat Envy Brushing Activator can expose you to chemicals including ethylbenzene and cumene, which are known to the State of California to cause cancer; benzene, which is known to the State of California to cause cancer and reproductive toxicity; and toluene, which is known to the State of California to cause reproductive toxicity. For more information, go to
|Envy 2-Part Varnish Data|
|Application Method: Brush; or roll and tip|
|Mix Ratio (Brush/Roll): 2:1|
|Number of Coats: 4-6|
|Application Temperature: 45°F to 125°F; 0-90% RH (relative humidity)|
|Film Thickness (per coat): 2-3 wet mils|
|Finish: Clear, Ultra-High Gloss, or Clear Satin|
|Volume Solids (Admixed): Approximately 60%|
|VOC (lb/gal): .52 (Activator), 3.0 (Base), 7.68 (Reducer), 2.8 (Admixed)|
|Overcoat Without Sanding: 12 hours at 77°F|
|Tack-Free Time to Recoat: 45 minutes at 72°F, 50% RH|
|Pot Life: 4 Hours at 72°F|
|Gloss: 92% at 60°|
|Satin Gloss: 20-40% at 60°|
|Coverage @ 3 mils (no loss): 360 FT 2 /GAL|
|Thinning and Cleanup: TotalBoat Envy Brushing Reducer|
|Envy Brushing Reducer Data|
|Induction Period: Allow an induction period of approximately 5 minutes prior to reduction and application.|
|Amount: 10-30% by volume of the admixed varnish with the reducer to achieve desired results, especially on the finish coat. Depending on substrate porosity, additional reduction may be used.|
|Example: 8 oz. Varnish Base (gloss or satin), 4 oz. Brushing Activator, and 1-4 oz. Brushing Reducer|
Note: The material and substrate temperature should be no lower than 45°F before, during, and after application. Do not apply paint materials to surfaces less than 5°F above dew point, or to surfaces warmer than 125°F. Substrate temperature should be minimum 45° to maximum 125°F. Do not apply when precipitation or dew may affect drying performance of finish appearance.