||One-component, airdrying undercoat, based on modified alkyd urethane resins.
||Intermediate coat for use over all types of one-component anti-corrosive systems above the waterline. Primer over Epifanes Washprimer AQ.
||High build, good sandability, provides excellent adhesion for all one-component alkyd and/or urethane-based topcoats.
||750 ml., 2000 ml., 4000 ml.,
||60 +/- 2 vol. %
|Recommended film thickness
||Per coat wet - 70 micron
Per coat dry - 45 micron
||Approx. 110 sq. ft./liter
||Brush, roller, conventional air spray, H.V.L.P., airless.
|Drying times at 65F / 65% RH
||Tack free - 1 hour Tape free - 24 hours
Dry - 12 hours Recoatable - 24 hours
||Conventional air: Thin as needed up to 15% with Epifanes Spray Thinner for Paint & Varnish. Spray viscosity 20 - 24 seconds Din Cup 4. 16 - 20 seconds Ford Cup 4. Nozzle 1.5 mm - 1.8 mm. Pressure 2 - 3 Bar.
||Temperature should be between 50F. and 85F. during application. Air humidity below 85%. Avoid painting in too much wind or sun. A rapid loss of solvents will occur under these conditions and will decrease the flowing ability. Add thinner up to the specified percentage to compensate for the faster release of solvents.
||Epifanes Yacht Enamel, Monourethane or Nautiforte