TotalBoat TableTop Epoxy is an easy-to-use pourable epoxy system for clear coating bar tops, tables, counters & more. Provides a clear, glassy finish that protects and preserves the surface underneath. Self-leveling, 100% waterproof system creates a maintenance-free durable finish that resists scratching, staining, and yellowing. All ingredients are on the USDA approved list for contact with food, once cured.
TableTop has a simple 1 to 1 mix ratio and cures at room temperature. Easy to mix and apply, it's a great choice for pros and DIYers alike. Cures blush-free and won't distort with age. In extensive testing, its finish clarity met or exceeded all similar products on the market. Compare to System Three Mirror Coat.
Available in 2 QT & Gallon sizes. Each order includes 2 stir sticks, 2 QT size paint pails, 1 plastic spreader, and a pair of latex gloves.
The item was added to your wishlist.
The item was added to your shop cart.
Features and Specifications:
Unique 2-part, high-viscosity epoxy system cures at room temperature
Easy to use 1 to 1 mix ratio, cures to a clear and deep glass-like finish
100% waterproof. Resists scratches, stains, and yellowing
Formula provides superior results on bar tops and table tops
All ingredients are listed on the USDA approved list for contact with food, once TotalBoat TableTop Epoxy has cured completely
Great for wood or art projects like embedding objects, decoupage and other crafts
Ideal for DIYers and professionals alike
Available in 2 QT and 1 Gallon kits:
2 QT kit contains 1 quart of resin & 1 quart of hardener
Gallon kit contains 1/2 gallon of resin and 1/2 gallon of hardener
Compare to System Three Mirror Coat Epoxy
*UV resistant formula, not intended for outdoor applications with prolonged exposure to sunlight
Coverage is typically 12.8 sq ft for one gallon at 1/8" thick. Coverage for the 2-Quart kit is typically 6.4 sq ft at 1/8" thick.
How to use TableTop:
Mix resin and hardener (1:1 ratio) in a mixing cup
Pour out epoxy in an S shape onto the surface
Spread with foam brush or plastic epoxy spreader
Let sit for 5 minutes
Move a propane torch or heat tool 6 inches above the surface. Going back and forth across the surface will eliminate air bubbles.
Allow epoxy to cure
Instructions and Tips
Mixing: Mix resin and hardener at a 1 to 1 ratio by volume. Mix for up to 5 minutes or until thoroughly blended. Be sure to use clean tools for mixing and application.
Temperature & Application: For best results, use at temps between 70° and 80° F. First, apply a thin seal coat to the surface. After the seal coat has set, apply additional flood coats up to 1/8" thick.
Leveling Tips: Flood coats will self-level but epoxy spreaders and brushes can be used to spread it over the surface.
Recoating: Additional coats may be applied after 4 to 8 hours without sanding or additional prep work. However, if the previous coat cures fully, scuff sand with 220 to 320 before applying another coat. After sanding, wipe down with acetone or denatured alcohol to remove sanding dust and let dry before applying an additional coat.
Resin Density at 25c, lbs/gal
Hardener Density at 25c, lbs/gal
Resin Viscosity at 25c, cP
Hardener Viscosity at 25c, cP
Viscosity Mixed at 25c, cP
Mix Ratio by Volume
Mix Ratio by Weight
Gel Time at 25c, 150 gram mass, min
Hardness, Shore D
Tensile Strength, psi
Tensile Elongation, %
Tensile Modulus, psi
Compressive Strength, psi
Flexural Strength, psi
Flexural Modulus, psi
HDT, Room Temp. Cure, F
HDT, Post Cure, F
Izod Impact, Notched, ft-lb/in
Number Of Parts:
I have a table that is 96" x 40". Will one gallon be enough?
Coverage is typically 12.8 sq ft for one gallon at 1/8" thick. You would need about 2 gallons.
JD Tech Team
Is there a shelf life for the TableTop Epoxy?I have leftovers from a year ago, can that still be used or buy new sealed product?
Yes, it should still be good.
JD Tech Team
Totalboat Tabletop Epoxy: I've tried unsuccessfully to do same thing your video did with placing a chart on a table top with the Totalboat Tabletop epoxy resin over it. Did you secure the chart to the table with a glue or just lay it flat and pour the resin on top of your chart? My chart is waterproof and glue did hold it down very well. While waiting on glue to dry chart wrinkled in a few spots before I even attempted to pour the resin on top. Any suggests to keep chart completely flat and wrinkle free?
First glue the chart down to the surface, be sure it is clean and the glue you use will secure it to the table. Then apply the Table Top Epoxy.
JD Tech Team
I want to use it on a table that converts to a berth and it may flex a bit, will it flex with the table or will it crack ?
It will flex a little but not much before it cracks.
JD Tech Team
Can tints be added to this? If so what type would you recommend? Thanks.
You could add a little Epoxy color agent to it.
JD Tech Team
How thick can you pour it, and it still dry? I am looking for something that would be anywhere from 3/8 to 1/2 inch thick and dry clear.
We recommend to do multiple 1/8" pours until you get to the desired thickness. Once a coat dries, you can recoat.
JD Tech Team
How well does this product (if mixed and applied properly) stand up to UV light and weather? I am thinking of coating various dried gourds (birdhouses and decoration gourds) to be placed outdoors in N. Central Missouri. Thanks...
These epoxies do not have UV inhibitors in them and will degrade in direct sunlight. A better choice would be a 2 part polyurethane varnish like out Totalboat Envy.
JD Tech Team
Can I use a lacquer for a sealer under epoxy
Yes, that will work.
What is the coverage per quart?
Coverage at 1/8" the 2 quart kit will cover 6.4 sq ft.The Gallon Kit will cover 12.8 sq ft at 1/8" thickness.
Can this product be mixed with colored pepples and be used as a shower floor?
Easy...but think ahead before starting
I used it to cover a 3' x 6' captain's table that had seen many years of wear. Besides the instructions that come with the epoxy, here are some tips:1. Put a blue tarp under the table to catch the dripping epoxy. Blue tarp easy to clean after epoxy dries. Do not use newspapers to catch drips or you will have an unmanageable mess.2. Be prepared to put down at least two coats, maybe 3. I embedded sections of old nav. charts on table top and needed 3 layers.(1st layer was to embed charts on table top).3. Using plenty of epoxy ensures table sides are smoothly covered. Too little on top and you will have rippled edges on the sides.4. Bubbles easily removed with heat gun. Gun is a lot safer than a propane torch.5. After pour finished, sight from side with aid of a light and you can see any last minute contaminants (ie hairs, bristles or particles) that are marring the surface. They are easily removed with a tweezer and show no marks thereafter.When finished and epoxy dried, the project looked great. I couldn't have been more pleased
I would buy this again
used on a birch wood counter top to highlight the wood grain without and distortion
Great product. Worked as stated and more
Video was very helpful
Smoke & Mirrors
Will be buying again
Easy to mix as it is 1-1 ratio, directions are clear, dries clear, will be buying again
Mc Kenzie, Tn
You have to watch for bubbles if the surface has defects. We3 used it to seal a table top that had split. It took several applications to get the surface right.
Great for Art Works
I use the product as a final glaze to artworks consisting of wood cutouts.
T Zuk Art
I would use again.
It is a must to have room temp. at 75 to 80 degrees at all times. Product is to thick at lower temp. ,difficult to spread and does not self level well. First attempt for me had poor results but after increasing room temp. to 80 degrees and maintaining for several days a much better result was obtained. Found better stirring method on another site and bought those products. Perhaps Jamestown Dist. could offer these as well. Products were an auger for drill and stir stick with holes in it so fewer air bubbles were created.
Great table top
This is a great product. I plan on using it in the future for other projects. My only issue was the temperature needed to apply the epoxy. I usually do my woodworking projects during the colder months, but the epoxy needs the heat to flow. My first table top was done in a room around 78 degrees (using a space heater) and was perfect. The second table top was done in a room around 70 degrees and it did not flow very well. As I said above, this is a great product, I would recommend the temperature be between 80-90 degrees and it would flow like water instead of 70 degrees it flowing like a typical glue.
This stuff worked great.
Mixed and poured well. Could use a bigger bucket to mix with though