JD on Facebook
JamestownTV

> Power Tools > Remove category: Drill Bits

Per Page: 
Items: 17 - 32 of 41 | Pages: Previous  1  2  3  Next 
Sort By:
  • Fuller Brad Point Drills - Regular Length

    Fuller Brad Point Drills - Regular Length

    Fuller Brad point drill bits are manufactured for hardwood drilling of holes into wood. American mad...

    In Stock 

    Price: $6.81 to $13.98
  • Fuller Brad Point Drills - Short Length

    Fuller Brad Point Drills - Short Length

    Brad point drill bits provide clean, straight, accurate holes in wood, plastic, and metal....

    In Stock 

    Price: $5.23 to $40.48
  • Heavy Duty Split Point Drills

    Heavy Duty Split Point Drills

    Heavy Duty Split Point drills have 135 degree angle points designed to cut metal. Regular drill...

    In Stock 

    Price: $2.08 to $13.53
  • Forstner Bits

    Forstner Bits

    Series 909 Forstner Bits cut a perfectly flat bottom hole and will bore any part of a circle...

    Price: $14.25 to $27.64
  • Type X Counterbores

    Type X Counterbores

    Fuller Type X Counterbore have four flutes and are adaptable to high or low speed spindles....

    In Stock 

    Price: $21.08 to $63.05
  • Extra Length HSS Drills - 12 inches long

    Extra Length HSS Drills - 12 inches long

    12in long drills for drilling plastic, metal, and wood. These long length drill bits have a 118...

    In Stock 

    Price: $13.73 to $45.27
  • Regular Point Drills - Hex Shank

    Regular Point Drills - Hex Shank

    High Speed Steel regular point 1/4in hex shank drills used for cutting wood and plastics. Can be...

    In Stock 

    Price: $7.43 to $8.51
  • Triumph Regular & Split Point 29-Piece Drill Sets

    Triumph Regular & Split Point 29-Piece Drill Sets

    29 piece drill sets are available in regular 118 degree high speed steel or 135 degree split point....

    Price: $110.44 to $119.62
  • Wood Plug Cutter 4 Plug Set

    Wood Plug Cutter 4 Plug Set

    Set of four WL Fuller wood plug cutters. 3/8 shank, sizes 3/8, 7/16, 1/2, 5/8. Carbon steel heat...

    Price: $77.27
  • Type B Counterbores

    Type B Counterbores

    Type B Counterbore - Fuller four flute counterbores for the flat under the head of nails, spikes,...

    Price: $26.51 to $80.39
  • Step Drills

    Step Drills

    Step drills can drill and countersink in one operation on wood, plastic, and metal. A step drill is...

    In Stock 

    Price: $12.73 to $43.30
  • Type E Countersinks

    Type E Countersinks

    Fuller Type E four flute countersink cuts wood and plastics for deep hole boring. All sizes are 1...

    In Stock 

    Price: $11.07
  • Type H High Speed Steel Countersinks

    Type H High Speed Steel Countersinks

    Type H Countersinks High Speed Steel were designed for metal, but can be used for wood and plastics...

    In Stock 

    Price: $18.77 to $43.48
  • Hex Shank 12in Auger Bits

    Hex Shank 12in Auger Bits

    12in Flute Hex Shank Heavy-Duty Ship Auger Bits for all types of construction. Precision machined...

    In Stock 

    Price: $41.24
  • Spade Bits - 6 Inch
    CLEARANCE

    Spade Bits - 6 Inch

    6in Spade Bits For wood. 1/4in shank fits conventional 3-jaw chucks. These spade bits work well for...

    In Stock 

    Price: $6.59 to $8.48
  • Long Drills - Regular Point 8 Inch Drills

    Long Drills - Regular Point 8 Inch Drills

    These long drill bits are 8in long, have a 118 point designed to be an all-purpose point, and will...

    In Stock 

    Price: $21.97 to $34.38
Items: 17 - 32 of 41 | Pages: Previous  1  2  3  Next 
 

Drill Bits

Fuller Drill Bit / Countersink Sets

Sets come complete with taper point bits, countersinks, stop collars and hex keys. Some kits have plug cutters, some have hex quick change bits. Designed for pre-drilling the shank of woodscrews. Standard Drill Bits, also known as Regular Point drill bits, have a 118 degree included angle point with cutting relief angles suited to cut metal or wood. It is designed to be an all-purpose point for cutting most materials.

Twist Drill Bits with 135 degree V-point are the standard, general-purpose bits, good for drilling wood, metal and plastics. They are excellent for cutting holes in end grain and are easy to sharpen.

Brad Point Bits are to be used for wood only. Better for cross-grain cutting than the traditional twist drill bit. A brad point bit will leave a cleaner hole, won't walk at start of cut or drift during the cut. The Brad in the center of the point allows accurate positioning when starting a hole even if the hole is not 90-degrees from the surface. The outlining spurs sheer the wood grain and leave a clean edge around the opening of the hole, eliminating the need for sanding. In most woods, the spurs also help to produce a cleaner edge when drilling through the backside of the wood.

Forstner bits are designed for boring holes. They will give you perfectly smooth, flat bottomed, clean sided holes in nearly every material. These bits are excellent for drilling at angles, including angles over 45 degrees. Use them in portable drills or drill presses

Spade bits are used to bore small holes through wood. Their angled spur design cuts cleanly. Spade bits are also used to enlarge existing holes, and can be used in high speed electric drills and presses.

Mortising chisels and bits are for making square mortises in one stroke and oblong mortises with each succeeding stroke. The hollow mortising chisel and hollow chisel bit work together. The bit allows you to drill a hole with a diameter the same as the length of a side of the desired square hole.

Auger Bits are not designed to cut accurately sized holes. Oversized clearance holes will always result. A barefoot auger bit will usually cut smaller than one with a screw point, but there are better bit choices out there for precise hole cutting.

Taper Point drill bits work well for pre drilling holes for the threads and shank portion of standard wood screws in a variety of hard and softwoods.

Screw extractor bits are for removing broken screws and bolts. Left-hand spiral tapered flute works itself into drilled hole and removes broken piece without damaging threads. Includes pilot drill bit for drilling pilot hole.

High Speed Steel Step Drill bits are for countersinking round head fasteners. Drills and countersinks in one step. Use on metal, plastic, and wood.

Vix drill bits feature a spring loaded, sliding outer sleeve that makes positioning the drill over mounting holes much easier. Used often for cabinets, doors, hinges, handles, drawer slides etc.

Plug Cutter bits by Fuller are made from heat treated steel. Easily cut your own plugs in either soft or hardwood with these four bladed plug cutting bits.

W. L. Fuller Co Inc. is a family owned, third generation, manufacturer of the best Countersinks, Counterbores, Plug Cutters, Taper Point Drills, Brad Point Drills and Step Drills made 100% in the U.S.A. today. With over 40 years experience manufacturing tools to cut woods, plastics and metals, we can recommend and supply the tools you need to get the job done while saving you time and money. All of our products carry our "Satisfaction Guarantee". Most orders are shipped the same day they are received.
Additional Drilling and Driving products are available from Freud (Forstner Bits), Stanley (Nut/Screw Drivers) and Woodstock International (various drill bit kits). Drill bits are used in power drills, traditional hand drills and presses.

TotalBoat Blogs Live Tech Support