Bomar locking deck plates are made of marine grade, ultra-violet (UV) stabilized resin that won't fade or discolor from prolonged exposure to sunlight. Deck plates utilize an internal O-ring seal to lock out moisture, and plate centers lock to secure when not in use. Available in 2 sizes to accommodate most boats.
The item was added to your wishlist.
The item was added to your shop cart.
Is there a replacement o-ring available for the 8 inch Bomar deck plate?
There is an oring for Beckson 8" pry-out deck plates the # is BEC-D8PG. I don't see one for the Bomar.
JD Tech Team
I suspect that this is the 8" deck plate in a recently obtained Escape Captiva sailboat. Is the outside diameter of the mounting flange 11-3/16"? Is the mounting hole circle 10-1/4"?Bob
No. The plates I have are roughly 10 1/2" outside, 8 1/2" inside.
need dimensions for this deckplate?? Is the 10" for the OD or ID? What is the largest diameter hole it will cover?Thanks,Chris
i am returning it as it doe snot fit what I need. Jamestown needs to put full information about the item. I have viking ptl8 whick is also 8" internally, but the viking seal is wider, making the cutout hole 9.3/4, while bomar is 8 3/4.Outside diameter in viking is 11 1/4 and in bomar I did not measure it.
Easy to install
I replace 4 of these in my cockpit in Dec 2010. Already they have cracks and leaks. Not good quality. CW
Dana Pt. CA
Locking plates much easier to use that screw style. Just make sure other users understand importance of unlocking before "prying" on tab to open access plate.
Good quality, no hardware included.
I replcaed my old screw out plates with these.Now I check inside all the time. Much, much better than old style.Worth the extra money, for sure.Feel heavier and better made than last set.Go for it.