Blue Sea Systems DC - 8 Position Toggle Circuit Breaker Panel
Blue Sea Systems Blue Sea Systems 8023
  • Blue Sea Systems DC - 8 Position Toggle Circuit Breaker Panel

Blue Sea Systems 8 Position Toggle DC Circuit Breaker Panel

Blue Sea 8 position toggle DC circuit breaker panel, pre-wired with five circuit breakers with three blank positions (8023) or six circuit breakers with two blank positions(8385) for future wiring additions.
 
IN STOCK - Not available for pickup
$195.82 / ea
qty.   
$195.82
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

 

  • All positive, negative and grounding buses installed, fully pre-wired
  • Panels with meters include toggle switch for mounting up to 3 battery banks
  • All panels with analog meters are owner upgradable to 24 Volts with 8240 or 8243 (18-32V DC meters)
  • All circuit label positions are backlit on standard panels - No kit required
  • "ON" indicating LEDs installed in all circuit positions
  • MIL-C-5541C or equivalent immersion undercoating for lifetime corrosion resistance
  • Two-part polyurethane slate gray finish
  • Heavy 1/8" aluminum 5052 alloy
  • Industry standard height and width
  • Countersunk mounting holes throughout
  • Detailed installation instructions and cutout template included
  • Includes set of 30 common Large Format Panel Labels
  • Over 500 individual labels available
  • Width Inches (mm): 5.25 (133.35)
  • Height Inches (mm): 7.50 (190.50)

 

Item Number  Description  Voltage  Amperage  Installed 15A Single Pole Circuit Breakers  Array 
BLU-8023  8 Position  12/24V  100A  Vertical 
BRAND: Blue Sea Systems
Current: DC
Type: Circuit Breaker Panels
4.5 2

You get what you pay for, Top Quality!!!!!!!!!

5

The old saying of you get what you pay for, this is top Quality!!! I replaced my old fuse panel in my boat with this new breaker panel. My old fuseswould get corrosion on them the would not be blownbut they would not work!! I would have to turn the fuse in the holder to get it to work, not a good thing when you boat on the great lakes and your electronics dont work.

Cowboy

Erie, MI Lake ERIE

true

Installation requires care

4

As with all Blue Sea equipment I have installed, the design and craftsmanship is superb. The printed manual that explains the electrical intricacies of installing the panel is excellent. I have found that cutting the hole for Blue Sea panels, however, is a little awkward and requires care. Very little clearance is provided between internal components and the hole's edge, and the tabs one leaves for the mounting screws are rather small (1/4 inch by 1/4 inch). The provided template is good, although it shows the mounting screw centers as 4.420 inches or 112.27 millimeters apart -- numbers only an engineer could dream up. Cut the paper template apart with a razor knife or Exacto, rather than a scissors, for best results.

Captain Paul

Minneapolis

true

Blue Sea Systems 8 Position Toggle DC Circuit Breaker Panel

4.52

100.0

Related Items:
TotalBoat Blogs Live Tech Support