Teleflex Tilt helm provides tilt wheel steering option for all mechanical steering systems. Tilt allows the wheel to be moved incrementally in a 48 degree arc. Similar in appearance to standard mechanical helms, except that instead of having one single steering mechanism with a shaft for attaching the steering wheel, the tilt version comes in two parts. Complete installation requires this part (TEL-SH915231P) and the Tilt Mechanism (TEL-SH91800P).
Requires SSC61XX Series QC cables (sold separately).
The item was added to your wishlist.
The item was added to your shop cart.
Quick Connect helm requires no tools for installation, just snap and go. The Safe-T has rapid response steering with 3 turns of the wheel from lock to lock. For single station applications only. Requires the use of SSC72xx or SSC61xx (QC II) Teleflex steering cables.
Installing a new Teleflex Steering System with Tilt Helm requires the following individual parts:
Tilt Helm Steering Mechanism (this part)
Tilt Helm Unit with Bezel (TEL-SH91500) - mounts on the outside of the steering console, and connects a flat ended shaft to a u-joint in the Tilt Helm Steering Mechanism
Steering Cable (TEL-SSC61_ _) of appropriate length
I have a Teleflex Safe-t Helm tilt system incorporating a SH1535094 that I need to replace. Will the SH915231 unit work as a replacement?
The SH915231P is the helm unit which mounts underneath the dash. It is compatible with the tilt unit supplied in the SH153094 kit.
EVENING.I WOULDLIKE TO INSTALL A TILT HELM KIT ON MY 1999 SEA RAY 18 FOOT BOW RIDER WITH 3.0 4 CYLINDER I / O I HAVE BEEN TRYING TO GET A ANSWER PLEASE ADVISE .. THANK YOU. LAWRENCE ALIMO
You will need:Tilt Helm Steering Mechanism (this part)Tilt Helm Unit with Bezel (TEL-SH91500) - mounts on the outside of the steering console, and connects a flat ended shaft to a u-joint in the Tilt Helm Steering MechanismSteering Cable (TEL-SSC61_ _) of appropriate lengthSteering WheelAlso you will need to be sure the cable will connect to the I/O unit.
There was an offset, from the existing one, that caused me to cut part of the frame to fit it but other than that it is a great product.