The Jabsco Y-Valve, also known as a waste diverter valve, controls the flow of onboard waste by diverting it from marine heads into an onboard holding tank or directly overboard where it is legal to do so. T
Padlock pictured above is not included.
The item was added to your wishlist.
The item was added to your shop cart.
Chemical and corrosion resistant polypropylene and stainless steel construction
Selector lever can be padlocked (lock not included) and/or sealed in either position
Ports can be rotated so discharge plumbing can be routed away in parallel, at 90 degrees or in opposite directions, or either up or down without disassembly
Valve is supplied with both 1-1/2" (38 mm) ports (fitted) and extra 1" (25 mm) straight inlet port
Optional shaft extension allows valve to be mounted through a bulkhead up to 1-3/4" thick with only the selector handle exposed
Easy access to three sturdy mounting feet for quick and simple installation
Easy access to valve by removal of just three hex head machine screws, top cover and diverter assembly lift away from the body
Waste Diverter Valve
I have one of these valves and it is leaking from the valve stem. I thought there would be a rebuild kit but can't find it. At 64$ maybe I should just throw the old one out and buy a new one?
you should be able to take it apart and replace the O ring
I installed these in two different boats over the years. Both were sanitation waste discharges. Never had a leak, Current one has been in service two years. Previous one about 10 years.Had not thought about servicing this valve. There is undoubtedly a seal at the shaft/stem. My suggestion - contact Jabsco. Maybe they'll give you a free replacement. Maybe they have a replacement seal or some sort of service kit.Good luck. Working on sanitation systems is never fun.
IS THIS SAFE TO USE FOR DRINKING WATER?
I suppose so. It is way oversized for any boat - or for that matter house - water supply I've ever encountered.The applications I've used this valve for have all been waste lines.
I would not use this for drinking water, you do not need an 1 1/2" port for drinking water. It works well for transferring waste water.
my only concern would be if the valve could withstand the pressure of the water on the closed side. typically there is very little pressure to the closed side.
what r the inlett & outlet sizes?
how can I purchase this item
nelse de loach
Better than most
I like the Jabsco unit because of the longer tail pieces that make it easier to double clamp the hose connections. Many Y-valves have very stubby hose barbs. Also, the ability to padlock the valve will keep the Coast Guard happy.