Vetus permanent diesel fuel tanks made of rigid linear polyethylene for safe mounting below decks. Poly construction means Vetus tanks won't suffer from rust and corrosion problems, and are much less likely to explode compared to traditional metal tanks. The fuel level is visible from the outside for reliable fuel level checks.
Tanks can be ordered with a choice of three connection kits that include an aluminum cover, 38mm/50mm filler, 16mm vent connector, blind cover for fuel sender, return fuel line fitting and fuel supply connector for 8mm, 10mm or 15mm. A tank interconnection kit is also available which allows twin tank installation.
The 6.5 gallon tank includes installation kit. For all other size tanks, appropriately sized installation kits are separate.
The item was added to your wishlist.
The item was added to your shop cart.
11 Gallons (42 liter)
18-1/8"L x 13-13/16" W x 11-7/16" H
16 Gallons (61 liter)
26"L x 13-13/16" W x 11-7/16" H
23.2 Gallons (88 liter)
31-1/2" L x 15-3/4" W x 13" H
29 Gallons (110 liter)
47-1/4" L x 13-13/16" W x 11-7/16" H
36 Gallons (137 liter)
47-1/4" L x 15-3/4" W x 13" H
45 Gallons (170 liter)
43-5/16" L x 17-21/64" W x 15-3/4" H
56-3/4 Gallons (215 liter)
39-3/4" L x 15-3/4" W x 23-5/8" H
88 Gallons (335 liter)
67" L x 27-9/16" W x 13-13/16" H
103 Gallons (390 liter)
55-1/8" L x 15-3/4" W x 31-1/2" H
Was looking to add approx. 30 gallon diesel transfer tank to my trailer. Do you make a tank that would except an electric fuel transfer pump?
do you make a tank that would except and electric fuel transfer pump ?
is there problems with diesel smell ?
Do they make this kind of tank for an Ford F550 pick up truck or can this one be used?\
Ftank25 not what it appears to be
The JD site implies that the the connection kit shown is included with the Ftank25. It isn't. They provide plastic 90 degree barbs that slip into rubber grommets in holes in the tank. While it will work, it's not the best arrangement, even for diesel. When Vetus drilled the holes in the tank, they didn't bother to clean out the plastic shavings in the tank. Make sure you do! The filler tube is molded onto the tank, and is 50mm (2 inch). So, if your filler intake on the boat is 1.5 inch, you need to adapt something. I'm still working on this. Surprisingly, Vetus and JD have no adapter