All Wood Glue, from the makers of CPES (Clear Penetrating Epoxy Sealer), will adhere not only oily hardwoods like teak, oak, and spruce, but will (with proper chemical surface preparation) glue a wide variety of metals, glass, rubber or plastic materials. The cured adhesive is completely waterproof and weatherproof.
*** NO LONGER AVAILABLE ***
This item is no longer available.
The item was added to your wishlist.
The item was added to your shop cart.
Formulated from natural wood resins
Adheres to oil hardwoods like teak, mahogany, oak and spruce
Can be used on properly prepared metal, glass, rubber and plastic
Simple one-to-one (1-to-1) mix ratio
A derivative of the Tropical Hardwood Epoxy
All Wood Glue is intended to be mixed one-to-one by volume, and is forgiving of minor mix ratio errors. Mixing by weight may be done at 10 parts A to 12 parts B by weight. For best results mix in one container, transfer to a second container and mix again. Allow to sit a few minutes before use, and allow to sit on wood joints with exposed end grain or exceptional roughness for at least half the pot life before assembly.
Dry to Touch
28 Deg F
40 Deg F
55 Deg F
70 Deg F
100 Deg F
Smith and Co
Number Of Parts:
Great Problem Solver
I used it, with great success, to repair an outdoor wooden carving which had deteriorated. I also used the correct surface preparation and followed it with the recommended epoxy filler.