Shields premium fabric-reinforced, marine hose is made from black, heavy-walled, synthetic rubber. Reinforced with 2 or 4 plies of synthetic cord. Resistant to: engine heat, exhaust fumes, ozone, mild chemicals, antifreeze, and salt water.
Improved compounding allows this hose to be used in marine water and wet exhaust applications. Use where wire support is unnecessary. Designed for engine water circulation, heat exchanger, heavy duty discharge lines, and wet exhaust connections. Compounded to resist engine heat, exhaust fumes, ozone, mild acids, engine coolant, and salt water.
All diameters sold in 12-1/2 foot lengths.
The item was added to your wishlist.
The item was added to your shop cart.
Temperature range: -20 F to +200 F continuous / +250 F intermittent
Meets SAE J2006 Type R1
what length is roll of 1-1/2 inch exhausy hose?
These are all sold in 12ft lengths.
can i buy a shorter lenght?
These are only available in 12-1/2 ft lengths.
Good w/ Considerations
Install without TIGHT bends, must not kink or crush over time. For wet marine exhausts a wire reinforced hose is best but harder to work with.Carefully match any hose to the fitting over which it slips. Must be a tight fit !! Use two hose clamps for all connections below water line.
Easy to Use
Very easy to use, especially compared to a ridged exhaust system.