TH Push-In Overflow Drain Tubes feature a tough, flexible vinyl plastic end and a standpipe of white PVC tubing. Simply insert the vinyl end into the opening of the thru-hull fitting to use and remove to drain livewell or baitwell.
Available in straight 12", straight 18" with screen or 18" bent 90 degree with screen, these tubes can be cut to customizable lengths.
The item was added to your wishlist.
The item was added to your shop cart.
Drain Plugs and Tubes
What size is the OD of the fitting that goes in to the drain I have a 1" ID drain in my live well
I believe it's 11/4 my well is 1inch, had to trim ribs on stand tube, worksgreat
I dont have my boat handy. If you can still use the answer, I will have it back by end of week.
This model fits a 1-1/8" thread.
JD Tech Associate
do you have the screw in tubes ?
I am not sure what you mean by "screw in", but I do use this tube to drain my live well. It works well, doesn't pull out from the sloshing of water, and can be cut down or extended by adding PVC pipe.
No, it just pushes into the drain in the bottom of the livewell. Works very well. You can adjust the height by cutting the PVC pipe at the desired level and reattaching the strainer on the top. Simple & effective.
No it's push in but the one I ordered is to small in diameter so I would be sure to check on that
No, it is slip-in type of connection. It has worked very well.
is the thru the hull end threaded with a nut?
thanks for the help,wayne-i like your web site and we fish at rehobeth and indian river inlet delaware.
No. pushes into the existing drain opening with a little elbow grease. works great.