COVID-19 Update: We are open & shipping orders! We are working hard to ship as quickly as possible, while ensuring the safety of our associates. Please note: we have closed our Bristol retail store. Click for details
Jamestown Distributors(800) 497-0010
Click to watch the JD Search Tutorial video & learn
all about searching and browsing on Jamestowndistributors.com
Shields SHIELDSAUST-C exhaust hose is designed for longer wet exhaust connections with significant bends. Shieldsaust C is suitable for engine intake or scupper lines. Black synthetic rubber tube and cover. Reinforced with double wire helix embedded between plies of synthetic cord. Resistant to: exhaust fumes, ozone, mild chemicals, antifreeze, salt water. Abrasion resistant.
Temperature range: -20F to +200F continuous, +250F intermittent. Meets SAE J2006 Type R2. 12-1/2 feet in length.
The item was added to your wishlist.
The item was added to your shop cart.
Wet Exhaust Connections - With Significant Bends
Can I get shieldsausts C exhaust hose cut to 20 foot single section, if not how much is a coupler?
It only comes in 12' lengths. You would have to use a coupler.
JD Tech Team
I am looking for the most flexible 4" exhaust hose that needs to do an "S" bend and also be collapsed down to a slightly oval shape in one 6" area to get under the stringer. ?
This hose should work OK.
I just don't think the 4" exhaust hose that we used will work. It is very stiff and for what you plan to use it for, no.
Very happy with the whole exchange!
Best value Website and timeline! Hope to do a lot more business with you!
I would by this again Great price and turnaround!
Great price and quick turnaround
Tim the tool man
Good product - great price
The old hose was installed on my boat for over 18 years so I naturally sought the very same product - found it at JD for the lowest price - very happy.
Good bend radius
This exhaust hose had the bend radius I needed to get the job done without kinking.
Shieldsaust-C Wet Exhaust Hose
I replaced the existing wet exhaust hose on my Westerbeke 27 with this product. It installed very easily. The bend radius is excellent - no kink problems.I haven't launched the boat yet, so I can't comment on reliability or durability. I expect it will last as well as other similar products.
Al your boating pal
Best bang for your $$$
I used the Shields SHIELDSAUST-C Exhaust Hose to replace the exhaust hoses on my westerbeke boat generator. The product appears to be made very well and was easy to install. After shopping around I found it MUCH less expensive (about $4 a foot) to purchase from JTD [...] then to buy locally.