Pro-Set epoxy adhesive fast cure rate
Pro-Set Pro-Set Epoxy
  • Pro-Set epoxy adhesive fast cure rate
  • gougeon brothers epoxy medium cure rate
  • Pro-Set epoxy slow cure rate

Pro-Set Adhesives

Pro-Set Adhesives by Gougeon Bros are pre-thickened, two-part epoxy adhesives formulated for secondary bonding of laminated composites as well as steel, aluminum, cast iron, concrete, stone, and most wood species. PRO-SET Adhesives will bond these materials, to themselves, or to one another in any combination. This versatility fits the requirements of the marine and composites industries, as well as the architectural, transportation, and civil engineering fields.

Choose from Fast (ADV 175/273), Medium (ADV 175/275), or Slow (ADV 175/277) cure rates. Each dual cartridge includes 1 Pro-Set static epoxy mixing wand (300MW).

Additional mixing wands available 6/pk (sold separately).

This product is for Professional use Only!

IN STOCK - Available for pickup
$65.77 / ea
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Pro-Set Adhesives
Pro-Set 175 Resin with Hardener. 175 Resin with Hardener is a cost effective, excellent multi-purpose adhesive for this wide range of materials. Resins and hardeners are thixotropic pastes. The mixture fills gaps easily, and will not sag on vertical surfaces. The material aggressively wets out the substrate, making priming or pre-wetting unnecessary on most surfaces, while ensuring a good bond.

Coverage: One cartridge set dispenses approximately 47 ft. of 1/4" bead, or 17 ft. of 1/2" bead, and will cover approximately 7 sq. ft. when spread with a 1/8" x 1/8" notched spreader, or 12 sq. ft. with a 1/16" x 1/16" notched spreader.

Shelf Life: When stored in temperatures of 65-85°F, shelf life is 18 months for the resin, and 18 months for the hardener.

Handling Properties  175/273 Fast Cure Rate  175/275 Medium Cure Rate  175/277 Slow Cure Rate 
Pot Life (100g) @ 72°F  9-11 minutes  27-33 minutes  45-55 minutes 
Working Time, 1/2'' Bead @ 72°F  20 minutes  30 minutes  2-1/2 hours 
Clamps Off Cure Time @ 72°F  3 hours  8 hours  16 hours 
Minimum Cure Temperature  45°F  65°F  65°F 
Mechanical Properties  175/273 Fast Cure Rate  175/275 Medium Cure Rate  175/277 Slow Cure Rate 
Compression Yield  10,700 psi  11,900 psi  11,800 psi 
Tensile Strength  6,250 psi  7,260 psi  7,070 psi 
Tensile Modulus  3.80E+05  4.20E+05  4.20E+05 
Tensile Elongation  4.2%  4.2&337;  4.4% 
Flexural Strength  11,100 psi  11,900 psi  12,100 psi 
Flexural Modulus  3.70E+05  4.10E+05   4.00E+05  
Lap Shear on 2024T Aluminum  1,830 psi  1,990 psi  1,980 psi 
Lab Shear on 1018 Steel  2,280 psi  2,330 psi  1,980 psi 
Tensile Adhesion to 2024T Aluminum  1,420 psi  1,760 psi  1,720 psi 
Tensile Adhesion to 1018 Steel  2,540 psi  2,830 psi  2,580 psi 
Hardness, Type D  82  82  84 


Please read all instructions and safety information on the label and in the SDSs (safety data sheets) before use. Wear safety glasses with side shields or chemical splash goggles, wear liquid-proof, chemical-resistant gloves (nitrile-butyl rubber, neoprene, butyl rubber or natural rubber), and full body-covering clothing. Use with adequate general ventilation and/or local ventilation to keep exposures below established limits.

When ventilation cannot be made adequate enough to keep exposures below established limits, use a NIOSH-approved respirator with an organic vapor cartridge, or organic vapor cartridge + P100 particulate filter, depending on specific workplace conditions. Consult with your respirator and cartridge supplier to ensure proper selection of respirator and cartridge based on ingredients listed in Section 3 and specific workplace conditions. Use and select a respirator according the guidelines established in OSHA 1910.134 or other applicable respiratory protection standard.

BRAND: Pro-Set
Material: Epoxy
Type: Epoxy Adhesive
Usage: Bonding
5.0 1

Perfect Application


Application, set times and strength were all as advertised. The adhesive made a very difficult project successful.

Senior Engineer- Junior

Grand Rapids, MI


Pro-Set Adhesives



Related Items:
TotalBoat Blogs Live Tech Support