Wood Bleach lightens wood to remove black water spots and stains. Simply mix the oxalic acid powder base with water to make a solution that gently lightens and bleaches uncoated wood. Avoid skin contact and protect eyes anytime using wood bleach.
The item was added to your wishlist.
The item was added to your shop cart.
Wood Bleach Applications:
Use on all unfinished woodwork, floors, doors, etc.
Remove black water spots and leaf tannin stains from bare wood
Use to gently lighten wood for color matching
Wood Bleach Directions
Protect eyes with goggles and wear rubber gloves. Protect skin from splashes
Wood must be free of paint, waxes, oils and dirt
Use Savogran paint removers and cleaners to remove coatings and dirt
Dissolve contents of package in one gallon of hot water
Apply hot solution with scrub brush. Apply liberally allowing solution to remain on surface until desired lightness has been achieved. If solution cools before job is finished, reheat but do not boil
Rinse repeatedly with clean water and allow to dry.
Lightly sand dry surface.
Surface must be clean and dry before refinishing or new finish may not adhere
Warning Do not mix with Chlorine Bleach or other chemicals. Avoid contact with skin and eyes. Do not breathe mists.
May be neutralized with one tablespoon of baking soda per one gallon of water
This Bleach didn't work for me.
I followed the directions exactly. Waste of my time. I will try a two part bleach on my next project