Stainless Steel Threaded Rod is also known as all-thread, ready rod, and threaded drill rod. Our threaded rod is easy to use with standard nuts and washers and is used for general purpose fastening. Threaded rod can be used in the stock length or easily cut to a custom length with a metal cutting hacksaw or power band saw. Sold in 3' and 6' lengths only.
The item was added to your wishlist.
The item was added to your shop cart.
MET / STD:
If i buy 150 ft of the 1/4" - 20 stainless steel rod in 3 ft length, would it be possible to have you pre-cut them to 1 ft increments?
Sorry, we don't have the ability to cut that quantity.
JD Tech Team
I'm a first time boat builder and I need a 9" bolt to connect the skeg to the keel. I don't have a big budget so I'm wondering if I can use a bronze or brass acorn nut with a stainless steel threaded rod? The boat is a 12" dinghy that will be used in fresh water.
George,First, I want to warn you against assuming the boat will only be used in fresh water. You clearly care about what you are making so it will have a long and varied life and one can never tell where it may travel. The concern is bi-metal corrosion. In effect different metals set up a battery that causes metal to deteriorate as well as the surrounding wood although not so much in fresh water. My advice is to stick with one metal. If you have fastened the boat with bronze stick with it. The material costs will soon appear minimal compared with your labor. Additionally brass is nowhere near as strong as bronze.Good Luck and Best Wishes, Rob
Brass should be compatible with Stainless, but why not find a stainless nut as well?
Im not a boat guy. I am a machinist though. Very common in industry to use all thread rod and nuts to basically make a bolt the right length. Or if you have a threaded hole already ,use it with just one nut and use your threaded hole for the other side. And bronze and stainless go together like peas and carrots.
Is this rod 316 or 304 What type of stainless is the threaded rod?
Ray. I wish I could answer your question but unfortunately I can not. Grade is not of importance to us as the rod is encapsulated in epoxy during the manufacture of our products. I can tell you the quality seems good - but because of the pricing, I would guess it is the lower grade. Why not simply ask them to send you a sample - I did before we bought. Wish you well.... Gary
Threaded Stainless Steel Rod
Great for use when you need longer lengths and it's a lot less expensive than buying SS Bolts. I used for installing a teak handrail on the coach roof of my sailboat.
Really, a review of threaded rod? Well yes, it was threaded and very rod like. The threads went the right way, and because it was stainless steel, it was, well, stainless. All in all an excellent stainless steel threaded rod.
I'm actually using the parts to build a fence around our garden that can be constantly re-tightened as needed.
I am using the threaded rod to refurbish the West Coast Mirrors on my 1968 Ford F-100 pick-up. The old hardware was well rusted and not salvageable. The rod cut easily with a hack saw with 32 tpi. The threads are true and I am looking forward to many years of service.