MAS Epoxy Resin and Hardener Pumps
MAS MAS
  • MAS Epoxy Resin and Hardener Pumps

MAS Epoxies Resin and Hardener Pumps

MAS Epoxy Resin and Hardener Pumps are for use with Quart, Half-Gallon, 1 Gallon, and 4- Gallon Size containers of MAS Resins. MAS pumps provide easy way to accurately dispense all MAS Epoxies resin and hardeners.

MAS pumps mount directly on the resin and hardener containers, eliminating the mess involved with measuring by weight or volume. They are calibrated to deliver the proper working ratio with one full pump stroke of resin for each one full pump stroke of hardener.

 
IN STOCK - Available for pickup  
$14.70 / kt
qty.   
$14.70
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

MAS Resin and Hardener pumps are to be used with MAS FLAG Resin, Low Viscosity Resin, Fast Hardener, Medium Hardener, and Slow Hardener.

BRAND: MAS
Material: Epoxy
Type: Epoxy Pumps
3.8 9

Great for mixing small batches.

2

Accurate measurements for small batches. Larger batches take much too long to dispense so graduated measuring cups work best.

Bobo

Minneapolis MN

No

pump

3

They for some reason changed the tip on the pump. Now it holds some glue in it and then it runs out on the table. The hardener pump has the original style tip that works great. You know if it works don't fix it!

Jdaddy

Crossville TN

not worth waiting for

1

The resin pump is very slow to use, better off just measure out and mix, much quicker. Hardner pump works well. Resin is just to thick.

GERALDZ

TORRINGTON, CT

No

MAS epoxy pumps

5

These pumps are indespensable and keep the proportions always accurate. Not messy to use either.

Kretchman fly rods

Kittery Point, Maine

Yes

I WOULD BUY THIS AGAIN

5

SIMPLE, EASY TO USE.

RAY

AKRON ,IN

Yes

Had a set go bad

4

It is simpler then measuring but you need check periodically that the pumps are working and the volume in your jugs are high enough. They need periodic cleaning too. I had a set go bad after 2.5 gallons of use.Bottom Line: Much easier then measuring but it is slower. If you are only doing small pots of epoxy I think this is the way to go. For larger pours or if you have a helper this item is not worth the hype.

Paul

Maryland

Yes

Good pumps

5

Very good the mixture proportions have always been correct and no dripping or leaking very pleased I recommend them.

Jim wood worker

Greensboro, NC

Yes

I recommend this product.

5

Very good the mixture proportions have always been correct and no dripping or leaking very pleased I recommend them.

Jim wood worker

Greensboro, NC

Yes

Pumps are the way to go

4

Matched epoxy pumps are definitely the best way to dispense for mixing the proper quantities of goo. It is was too easy to not mix the correct amounts and cause yourself issues. Be aware that you should buy pumps to match the resin you buy. Most brands of epoxy have different mix ratios.

SeaDogger

Hyannis, MA

Yes

MAS Epoxies Resin and Hardener Pumps

3.89

75.0

Related Items:
TotalBoat Blogs Live Tech Support Jamestown Forum Free Catalog