Interlux Fiberglass Paint Remover Paste Stripper
Interlux Interlux
  • Interlux Fiberglass Paint Remover Paste Stripper

Interlux Interstrip 299E Fiberglass Paint Remover

Interlux 299E Paint Stripper Removes paint from all surfaces including fiberglass. Also called Interstrip 299 paint stripper. Interstrip 299E is Safe for fiberglass surfaces and has a low odor. Interstrip 299E incorporates special sealing agents that allow the stripper to stay wet longer, thereby lengthening working time.
IN STOCK - Available for pickup  
$37.84 / qt
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Preparation Protect floor or work area with a plastic tarp to catch run-off.

Method With a natural bristle brush, apply a liberal coat of Interstrip Semi-Paste over paint in an area no larger than 10 square feet at one time. Allow the Interstrip Semi-Paste to stand until all layers of existing paint are penetrated. This will vary from as little as 15 minutes for one layer to as long as 2 hours for several coats depending on temperature. Begin scraping. If the paint does not come off easily, reapply and increase the waiting time. After the surface is thoroughly scraped clean, apply Interstrip Liquid Stripper 399 to remove any residual paint or wipe the surface with a rag or pad soaked with Fiberglass Solvent Wash 202.


Ventilation and Humidity Control Apply in a well ventilated area.

Brush Use a natural bristle brush.

Other Enamels removed from fiberglass will reveal gelcoat that has not been exposed to the same level of UV light as the surrounding area. Color variations in the gelcoat are likely.

Some Important Points Caution! To avoid damage to Fiberglass, do not leave Interstrip Semi-Paste on for more than 8 hours. Avoid painting in direct sunlight. Use ideally at room temperature (60-80 F/16-27 C).

Compatibility/Substrates No compatibility issues.

Number of Coats As required

Application Methods Brush


  • Color Y299E-None
  • Specific Gravity 0.814
  • Typical Shelf Life 2 yrs



TRANSPORTATION: Interstrip Semi-Paste should be kept in securely closed containers during transport and storage.

STORAGE: Exposure to air and extremes of temperature should be avoided. For the full shelf life of Interstrip Semi-Paste to be realised ensure that between use the container is firmly closed and the temperature is between 5 C/40 F and 35 C/95 F. Keep out of direct sunlight.

DISPOSAL: Do not discard tins or pour paint into water courses, use the facilities provided. It is best to allow paints to harden before disposal. Remainders of Interstrip Semi-Paste cannot be disposed of through the municipal waste route or dumped without permit. Disposal of remainders must be arranged for in consultation with the authorities.

BRAND: Interlux
Type: Paint Strippers
1.0 4

buyer be aware this woul;d not even come close to re moving


buyer be aware this does not remove all paints i wasted my money

aldo locatelli

ponca city ok


I would not buy this product again.


I used this product exactly as recommended on the product label and it was no more than applying water. I carried it to a professional paint & body person. He used it as well and agreed that it is was worthless.

Captain Wayne

Myrtle Beach, SC




Absolutely does not do a thing. Stuff from [...] worked better. I would try the ready strip marine next time.


Midlothian, Va


This product ruined my gel coat.


Be careful when using this product. I purchased this to remove a painted on name from my transom. I tested a small area without any issue. After applying it to a larger area, pieces of my gel coat started falling off.


St. Louis, MO


Interlux Interstrip 299E Fiberglass Paint Remover



Related Items:
TotalBoat Blogs Live Tech Support Jamestown Forum Free Catalog