The Rule model 24 bilge pump offers 360 gallons/hour pumping ability. 12-volts. Great for smaller boats, and has a removable base that's easy to clean. Rule submersible pumps are installed by many boat manufacturers because they offer good performance at a great price.
Their motors feature stainless steel shafts, water-cooling and a vibration-free centrifugal impeller that won t burn out if it runs dry. Each requires a panel switch for manual operation or a float switch for automatic operation. 3/4" discharge.
The item was added to your wishlist.
The item was added to your shop cart.
Bilge Pumps and Accessories
Is a 1 amp ac/dc 12v power supply sufficient? Can you recommend one that is similar to a phone charger.
Sorry I don't know of any that is similar to a phone charger
The pump's information label (I checked just now) calls for a 2.5 amp 12 volt fused circuit. I would not recommend something such as a phone charger as they are not designed to provide the amperage required to run the pump; remember, the pump is intended to move a fair amount of water up and out of a boat - something that represents a significant amount of work. If this pump is not intended for marine use, and 110 v ac is available, consider a small sump pump.
what are the demnsions of the unit, height, diameter?
The pump is 3 1/2 inches tall and the base diameter is 2 1/4 inches excusive of the outlet spout.
The pumps were installed down in the hull and are not easily accessed.Sorry
can you put this pump under the water?
I put it under the water and it worked for me
Great bilge pump!
I ordered the same bilge pump for replacement so that I could use the same mount. Worked great with short installation.