Corrosion resistant 3/8" tin-plated copper studs are 250% more conductive than brass.
Vaporproof / ignition protected.
Case design allows for surface or flush mounting.
UL listed - UL1107 Electric Power Switches.
Meets UL 1500 - Ignition Protection Requirements, SAE J1171 - External Ignition Protection Requirements, and ABYC standards.
CE marked for EC applications.
$45.96
$50.44
$60.55
The item was added to your wishlist.
The item was added to your shop cart.
NOTE: BSS-9004E switches are Orange in color.
BRAND:
Blue Sea Systems
Type:
Battery Switches
Can the switch be mounted where it might get a little rain or prop wash?
Undisclosed
Yes, fresh water
Amateur rig
Do not recommend!
JOHN MATTHEWS
I have a 28 foot pontoon with a 150 Yamaha outboard I need a dual circuit system to maintain to battery to avoid dead battery from stereo usage etc.. will this work?
Jeff T
Yes
Amateur rigger
I purchased the switch several years ago for my 26' Carver. The switch shown will work just fine. Make your starter battery "battery 1". Wire the + lead from that battery to the #1 post on the back of the switch. For your house battery "battery 2", wire the + lead to post number two. Then attach all the house and starter cables to the common post. When you want to preserve the starting battery, switch to #2 so your house battery provides power for accessories.
RANDY HEIN
Hi Jeff,I purchased one of these battery four way switches for a solar system. The four way switch will work perfectly for your application and provides the advantage of being able to simultaneously select both batteries. Keep in mind when one battery is selected only that battery will be charged when outboard is running, to charge both batteries select BOTH on switch. Happy boating :)Steve
STEPHEN LAPALME
The dual 1+2 position would only be needed for charging both batteries at the same time, or using both at the same time. It would work great for a dual system. I used them on a 24v electric vehicle to switch from bank to bank of series deep cycles- no problem. They do work constant supply, switching doesn't turn the stereo off. Great product
PAUL SCHLEGEL
What size L x W x D ?
Undisclosed
Hey.. I can't say for sure since I installed it on my boat back in 2009, and the boat has been covered and stored for the winter. I'm assuming you're asking because perhaps you have a tight place you want to see if it will fit inside. In that case, my answer probably won't be much help, but overall it's about 4-1/2 inches square, and stands out off the panel about 2-1/2 to 3 inches. I haven't had any trouble with the switch. I've got a 14.5' Princecraft aluminum fishing boat with a 30hp Johnson engine.Hope this is helpful,-Jeff.
JEFF VAN'T SLOT
Look at the BlueSea website. They have tech details for all their products for download.This portal doesn't allow to paste URLs...so you have to find it yourself.
Special order items are not stocked and are ordered direct from the manufacturer. They are non-returnable, may take 2-4 weeks, price and shipping charges subject to change.
Checkout: 
Item(s) in your cart:
The item was added to your wishlist.
