Do the hook and loop triangles fit on a Chicago Multi Tool?
YES, the Fein Multimaster Hook & Loop Triangular Sanding Sheets will fit on the Chicago Multimaster Tool.
It should, the Velcro / hook and loop backing should work.
Don't know. I don't have a Chicago multi tool.
do these hook and loop triangles fit on a dremel multi-max sander?
Yes it does... very nicely too I might add...
What's the best hook and loop to remove rust from trailer tongue?
For me it would depend on the depth and pitting level of the rust. If it is light surface rust I would use 80 grit and if there is some but little pitting I would start with 36 grit then 80. If the rust is deeply pitted then I would wire brush it with a power implement to get down in the pits.
40 or 60 grit. You might also try a stiff wire wheel on a rotary power supply--drill or something of that ilk.
I would say start with an 80 grit paper as long as it is the flat part of the tongue. If it involves the hitch or other curved parts a compressor with a needle scaler would be the best. Then finish that part by hand with sandpaper.Steve
Not just for boats
Use with Fein multimaster sanding. I restore old wood machinist chests for my hobby. The triangle sanding pads are great for getting in to tight places.
Rancho Cucamonga Ca
They work GREAT!
Easy to switch for course to fine grades as you prepare a surface for finishing.
Great product and company to deal with. Will purchase in the future.