FlexEpox Flexible Epoxy Adhesive 32 oz. Kit
TotalBoat TotalBoat by Jamestown Distributors
  • FlexEpox Flexible Epoxy Adhesive 32 oz. Kit
  • FlexEpox Flexible Epoxy Adhesive 8 oz. Kit
  • Epoxy Kit Contents

TotalBoat FlexEpox Flexible Epoxy Adhesive

TotalBoat FlexEpox is a tough, 2-part flexible epoxy adhesive used to create permanent structural bonds that dynamically absorb stresses from contraction, expansion, shock, & vibration, and bend without breaking. Use on fiberglass, metal, plastic, and wood—even hard-to-glue, oily domestic and tropical hardwoods. Great for repairing aluminum boats, too.

Simple 1:1 mix ratio, 75-minute working time, & fast cure time make it easy to use and ideal for quick repairs. Also for creating small laminated parts subject to a lot of flexing.

FlexEpox works in a wide temperature range, from 40 to 125°F, and can be applied to damp surfaces. It can even cure underwater. Pair with TotalBoat fillers to suit your application.

Available in an 8 oz. kit and a 32 oz. kit. BONUS: Each kit includes 2 16 oz. mixing pots, and 2 stir sticks.

Free shipping
$19.99 / kt
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Compare to two-part West System G/Flex 650. TotalBoat FlexEpox maintains its form and properties better at higher temperatures, and is a better value. It also has higher flex tolerances and lasts longer than flexible, one-part urethane adhesives and sealants.
Item Number  Kit Contents 
TB-7751 - 8 oz. Kit  One 4 oz. bottle of resin and one 4 oz. bottle of hardener 
TB-7752 - 32 oz. Kit  One 16 oz. bottle of resin and one 16 oz. bottle of hardener 


  • Bonds fiberglass, glass, metal, plastic, and wood, including hardwoods that typically are a challenge to bond because of their natural oils.
  • Unaffected by contraction, expansion, shock, & vibration.
  • Simple 1:1 mix ratio, long open time, and fast cure time make FlexEpox easy to use.
  • Forms permanent bonds on dry or damp surfaces.
  • Can be used in temperatures as cool as 40°F.


  • Color: Amber
  • Mix Ratio: 1 part resin to 1 part hardener (by volume); 1.21 parts resin to 1 part hardener (by weight)
  • Gel Time: Adhesive will gel in approximately 40 minutes at 72°F
  • Working Time (thin film) (@ 72°F): 75 minutes
  • Initial Cure Time (@ 72°F): 3-4 hours
  • Workable Cure Time (@ 72°F): 7-10 hours (24-hour minimum for high loads)
  • Application Temperature: 40-125°F


BRAND: TotalBoat
Material: Epoxy
Number Of Parts: Two Part
Type: Flexible Epoxy
4.9 20

Worked as advertised


Worked well reattaching a handle to a PVC dingy


Billings, MT


Excellent choice!


Used it to protect the underside of my hull, it was an excellent choice. I would buy this again to finish the rest of my Bote rover

Ainokea' we go!

Orlando, FL


Works great.


I highly recommend this product. Small patches or a. large area, easy to use. Very durable.




Works great


To repair just about anything. Just like G-Flex but less expensive.


Ramrod Key, FL


I would buy this product again


I used a small amount one time and like its extended working time. I will use it more as the project progresses

El Tigre`

North Augusta SC


Exc product


Used it to glue fancy border of parquet flooring to plywood. Honey-like consistency easy to work with. Decent pot life of approx 30 min and overnight cure


Baltimore, MD


Great product


Delivery was great and product worked ad Indecated without any problems!



Excellent adhesive. Needs better mix system.


I use flexible epoxies for ski construction and repair. In the past I've used 3M DP105, West G-Flex, and LocTite flexible marine epoxy. After working on 3 pair of skis with FlexEpox I prefer it to all the others. The only drawback is the very dark color, but this can be managed.I do not like the mixing system for the 8oz kit. The tubs are far too large to be useful. Ski repair uses very small quantities of epoxy and mixing enough for accuracy with this product causes quite a bit of waste.I would pay extra for this product if it came with a mixing nozzle type system like the 3M gun -- my usual trick of drawing from each bottle with a separate syringe, then mixing in a paper cup or on a disposable surface does not work well because the hardener is too thick to suck up with a syringe. Best thing I've come up with so far is to mix by *weight* using a paper cup and a jeweler's scale, but if you try this be aware the weight ratio is 1.2:1, not 1:1 like the volume would be.

Huck, destroyer of skis

New York


TotalBoat FlexEpox Ipe Strength Test


FlexEpox strength test on resinous Ipe wood. Joint edge, sand 120 grit, wipe lacquer thinner 4X. Apply FlexEpox using gravity alone (no clamping). Cure 2 days/ ~70degF. Destructive impact test using hammer/vise. Test Result : Note pics indicate no glue failure. Last break occurring thru glue line.


Santa Cruz,Ca.


So far . . . so good


I make cutting/serving boards that sometimes have cross-grain pieces. i.e. Long grain attached to short grain. So to accommodate wood movement I needed something with just a bit of flexibility AND would be waterproof. So far, this is working great. If you want to see what I mean by cross-grain you can see it here: https://www.corneroakswoodworking.com/portfolio


Lyme, NH


TotalBoat FlexEpox Flexible Epoxy Adhesive



Related Items:
TotalBoat Blogs Live Tech Support