TotalBoat 2:1 Epoxy Pumps are metered to make measuring and dispensing the exact amount of TotalBoat 2:1 Resins and Hardeners quick, neat, and easy. Pumps provide the precise 2:1 mix ratio so you get a proper cure every time without worrying about measuring correctly. This simple 2:1 epoxy pump system requires just one full stroke of Resin and one full stroke of Hardener dispensed into a mixing cup. Stir resin & hardener thoroughly and apply.
For convenience, resin and hardener pumps are color coded to match the corresponding product. The pump with the Blue Dot works with TotalBoat 2:1 Resins, and the pump with the Red Dot is used for the 2:1 Hardeners.
TotalBoat 2:1 Epoxy Pumps are compatible with TotalBoat High Performance 2:1 Resin/Hardeners and TotalBoat Penetrating Epoxy Resin/Hardener (regular and cold weather formulas).
The item was added to your wishlist.
The item was added to your shop cart.
(1 ea) 2:1 TotalBoat Resin Pump, Blue Dot on Pump Head
(1 ea) 2:1 TotalBoat Hardener Pump, Red Dot on Pump Head
(1 ea) 2:1 Epoxy Pumps Instruction Sheet
(2 ea) 10 inch wooden stir sticks
(1 ea) Pair of large latex gloves
TotalBoat 2:1 Epoxy Pumps are designed for use with TotalBoat 2:1 High Performance Epoxy Resin/Hardener and TotalBoat Penetrating Epoxy Resin/Hardener ONLY.
IMPORTANT: Pumps are calibrated and measured to automatically dispense the appropriate 2:1 mix ratio with ONE-pump of Resin to ONE-pump of Hardener.
After trimming if needed and properly inserting pumps, be sure to prime the pumps before use by pushing down and releasing the head of each pump several times until you get a steady stream of liquid without any air pockets.
Approximately how much product do you get with one plunge of each pump? I realize there is a 2:1 mixing ratio so I'm looking for the total volume of resin and hardener you get after plunging each pump once. Thx
A little more than an ounce.
JD Tech Team
I will need more before this job is over.
All I can say is that it's working. The other one didn't.
Would buy again.
Makes mixing a whole lot easier.
Simplified the process
Made the process easy as I made several batches and applied several coats to my project.
Makes it easy
Follow the easy directions and perfect mix every time.
Measuring pumps for epoxy
These are really handy! How long they will last, being plastic, I don't know, but for mixing 2:1 epoxy in small batches; I really like them. Equal number of strokes - what could be easier?
I don't use a nickname.
Left Coast of the US
Makes life easy
If you can count, you can mix epoxy perfectly. Trim the tube to length (for the height of your resin / hardener containers) and count an equal number of pumps from each bottle - you nailed it. Be aware that the hardener is more watery and will tend to shoot out of the pump - don't miss the cup like I did first time.
Awesome takes the ALL guess work out
Would highly recommend having this as part of the kits. I ordered a kit and then had to reorder the pumps.
Easy mix epoxy
I purchased this to work with the penetrating epoxy product. Makes measuring for the correct mix easy and clean. No spill - no mess - works great!