COVID-19 Update: We are open & shipping orders! We are working hard to ship as quickly as possible, while ensuring the safety of our associates. Please note: we have closed our Bristol retail store. Click for details
Jamestown Distributors(800) 497-0010
Click to watch the JD Search Tutorial video & learn
all about searching and browsing on Jamestowndistributors.com
Quantum 2KA Two-Component Polyurethane Aerosol Topcoat delivers durable, repairable, ultra-high gloss Quantum99 polyurethane topcoat in a convenient spray can that's a perfect size for repairs & small projects.
The base & activator are measured precisely and automatically inside the can so there's no messy measuring & mixing. Quantum 2KA's advanced propellant technology is easy to use, just aim and spray to get exceptional gloss, gloss clarity, gloss retention, chemical, stain, & weather resistance. Aerosol applies evenly and consistently until can empties. Each can covers 27.5 sq ft @ 1 mil, and empty cans are recyclable.
Available in 13 popular Quantum99 colors and Clear.
NOTE: Once activated, usable pot life is about 12 hours @ 72 degrees F.
The item was added to your wishlist.
The item was added to your shop cart.
The Quantum High Solids Repairable Marine Finish System is Now Available in an Easy-To-Use Aerosol Spray
Before the introduction of Quantum99, 2 part topside paints were for professional use only. Complicated reducers, activators, and primers meant that 2 part polyurethane systems were mostly used by builders, yards, and professional paints.
Quantum99 has raised the bar again for topside paint systems, because now it's available in a two-component aerosol spray that's easy to use for touch-ups or for coating smaller areas.
Quantum99 has garnered rave reviews and proven results for superior gloss, gloss retention, and durability. Easy to use. Easy to repair. Its high-solids, eco-friendly formula ensures fewer coats and VOC compliance.
Quantum 2KA 2-Part Aerosol Polyurethane Topcoat Features
No measuring, mixing, or mess—the precise ratio is engineered into the aerosol delivery system
Excellent atomization and consistent flow rate are provided by the advanced propellant technology
Easy to apply and spray consistently until can empties fully
Superior gloss clarity
Provides enough coverage with multiple cans to use as a full application for most trailered watercraft
No clean-up needed, and empty aerosol cans are recyclable
Caution: Application of these product systems requires recommended temperature/humidity conditions and film thickness ranges. The material, hangar, and substrate temperature should be no lower than 45°F before, during, and after application. Do not apply paint materials to surfaces less than 5°F above the dew point, or to surfaces warmer than 125°F. Substrate temperature should be minimum 45°F to maximum 125°F.
Notes: Air dry and overcoat times are dependent on shop conditions. To accelerate dry times, use Quantum99 Urethane Accelerator (sold separately). If recoating after 24 hours, scuff-sand with 320-800 grit sandpaper.
Quantum99 Polyurethane Topcoat Advantages:
Ultra high gloss and gloss clarity(DOI)
Superior durability and abrasion resistance
Acrylic-polyester hybrid combines aerospace paint toughness with automotive paint repairability
Excellent repairability--get a perfect application every time
Twice the solids = twice the coverage as leading brands
Easy to mix/apply
Proprietary technology improves flow, gloss, and gloss clarity
Easy cleaning with marine soap and water. No buffing/waxing needed to restore gloss.
Longest in-service life
Available Quantum 2KA Aerosol Colors:
Blue Tone White
Before activation, shake the aerosol can vigorously for 2 minutes.
Remove the red button from the cap.
Turn the aerosol can upside down and attach button to pin on aerosol bottom.
Place the aerosol can upside down on firm ground.
Press the red button with the ball of your hand until the stop is reached.
After activation, shake the aerosol can again vigorously for 2 minutes.
Quantum 2KA Aerosol
Ultra-high gloss, various colors
>92 @ 60°
Distinctness of Image (DOI):
>84 @ 20°
<420 g/L (3.5 LBS/GAL) - All colors.
Coverage per Can:
27.5 sq. ft. @ 1 mil
16-18 Zahn #2
Volume Solids (Admixed)
52 +/- 2%
Usable Pot Life:
Approximately 12 hours after activation @ 72°F
Direct/Reverse > 80 inches/lb.
2 years from date of manufacture
For interior and exterior use above the waterline only. Not for use below the waterline.
Use Quantum Adhesion Promoting Surface Treatment (sold separately) before application to ensure strong adhesion of this coating.
Air Dry @ 72°F, 50% RH)
15 minutes, minimum / 24 hours, maximum
1 hour, minimum / 24 hours, maximum
Personal protection is required for using Quantum 2KA or being in the environment where Quantum 2KA is being applied. Use respirator mask type A2/P2 and protective gloves. It is also recommended that you wear a paper paint suit to protect skin and clothing during application.
Quantum 2KA contains isocyanate. Persons with lung or breathing problems or prior reactions to isocyanates must not be exposed to vapor or spray mist. Before using, read all safety information on the aerosol label and the safety data sheet.
Below Water Line (yes/no):
Number Of Parts:
Hello, I need (4) Quantum 2KA Two-component Polyurethane Aerosol Topcoat cans in Insignia White 1022. Along with 2 rattle cans of 4599 of primer. Can you supply a price that includes shipping? I have talked with email@example.com
Please call one of our sales associates at (800) 497-0010 so we can help you place your order.
JD Tech Associate
Hi, I'm looking for 2KA two component Polyurethane aerosol topcoat in Insignia White 1022. I don't see it listed in your available colors. Is this special order? If so what is the smallest quantity I have to purchase? How soon can I have it? I have been in contact with (firstname.lastname@example.org) Thanks Joe Kilpela
We can special order this color and usually the turn around time is not too long. Please give one of our techs a call at (800) 497-0010 so we can figure out how many cans you need and go from there.
JD Tech Associate
Is the Quantum 2k spray paint oyster white the same color as Awlgrip's oyster white H8139/F8222 ?
It is pretty close to the Awlgrip color.
JD Tech Team
Is the Quantum oyster white spray the same color as awgrips oyster white ?
Yes, it's supposed to be a close match.
JD Tech Team
Is this paint OK to use on a aluminum boat that is sanded but has paint and bare spots of aluminum exposed. And is one can enough to cover a Suzuki 15hp 4 stroke outboard.
The risk is that if the paint that is left is only a single part paint, this product could blister that old paint unless removed.
JD Tech Team
Do you recommend the outboard paint be used on a bronze propeller for a sailboat. If not what do you recommend for keeping barnacles off bronze propellers in salt water? Have used zinc spray in past. Thanks
TotalBoat Outdrive AF Antifouling Paint will work on props.
JD Tech Team
Used on a jet ski. On long spay patterns, had spitting from the can, which caused runs. Nice finish otherwise. Would use again but would look for more application guidance