Pettit EZ-Poxy Performance Enhancer Additive
Pettit Z-Spar Pettit Z-Spar
  • Pettit EZ-Poxy Performance Enhancer Additive

Pettit EZ-Poxy Topside Paint Performance Enhancer Additive

Add EZ-Poxy performance enhancer to one-part, solvent-based Pettit topside finishes for higher gloss, durability, longevity, and scratch resistance. This additive increases flow out of brush strokes and roller stipple, providing a mirror-like high gloss finish.

Use with EZ Poxy, EZ Bilge, and EZ Decks for the appearance and performance associated with expensive 2-part linear polyurethane finishes. Unlike 2-part paints, paint and varnish catalyzed with Performance Enhancer can be applied over one-part finishes in good condition. Use one 8 oz. can per gallon of paint or varnish.

 
IN STOCK
$23.89 / ea
qty.   
$23.89
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
WARNING: EZ-Poxy Performance Enhancer contains polyisocyanates. Apply by brush or roller only. DO NOT SPRAY!

Features

  • Gives Pettit one-part polurethane topside finishes the high gloss, gloss retention, hardness, and durability of two-part urethanes
  • Coatings combined with Performance Enhancer can be applied over one-part finishes, unlike other two-part urethanes
  • Superior hardness and scratch resistance extends the life of the coating
  • Increases flow out for a glossy, mirror-like finish
  • Can be used in all Pettit solvent-based, high-gloss topside paints including EZ-Poxy, EZ-Bilge, EZ-Decks, and Pettit Varnishes

Associated Pettit Products

  • EZ-Poxy Topside Boat Paint
  • EZ-Decks Non-Skid Deck Paint
  • EZ-Bilge High Performance Bilge Paint
  • Captain's Varnish
  • Flagship Varnish
  • High Build Varnish
  • Captain's Ultra-Clear Varnish

 

Vehicle Type  Isocyanate catalyst 
Mix Ratio  16:1 (paint to hardener by volume) 
Application Method  Brush or roller ONLY. DO NOT SPRAY! 
Thinner  Pettit 120 Brushing Thinner or 120VOC Thinner 
VOC Content  607 g/L 
Pot Life (used with EZ-Poxy) 
90°F - 2 hours 
70°F - 3 hours 
50°F - 5 hours 
Dry Times (used with EZ-Poxy)  To Touch  To Touch 
90°F  1 hour  8 hours 
70°F  2-1/2 hours  16 hours 
50°F  5 hours  24 hours 
WARNING: Cancer - www.P65Warnings.ca.gov

BRAND: Pettit Z-Spar
Type: Additives
Related Items:
TotalBoat Blogs Live Tech Support