Quantum 45 Adhesion Promoting Surface Treatment
Quantum Quantum marine coatings
  • Quantum 45 Adhesion Promoting Surface Treatment
  • Quantum 45 Adhesion Promoting Surface Treatment Aerosol

Quantum 45 Adhesion Promoting Surface Treatment

Quantum 45 Adhesion Promoting Surface Treatment creates an innovative polymeric adhesive film on a variety of substrates to promote strong adhesion and a more durable finish. Use this advanced adhesion promoter under Quantum topcoats and primers.

Choose from a Quart size can or 12 oz. Aerosol spray.

 
IN STOCK - Available for pickup
$33.60 / ea
qty.   
$33.60
$50.40
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Specifications

  • Components: One
  • Color: Clear
  • Application Method: Spray via aersol can or spray equipment listed below
  • Surface Cleaner: Quantum SR-002 Surface Prep Cleaner
  • Spray Application: Wet out the entire surface spraying 1 light, uniform coat. Apply additional coat as necessary in 5 minutes, not to exceed 12 hours.
  • Dry/Overcoat Time: Adhesion promoter will be dry to the touch in 5 minutes and ready for primer/topcoat application.
  • Shelf Life: 2 years from date of manufacture.

Compatible Substrates

  • Fiberglass
  • Gelcoat
  • Metals
  • Ceramic tile
  • A variety of plastics
  • Previously painted surfaces, prepared properly

Spray Equipment

  • Refer to the manufacturer's directions for gun recommendations.

 

Spray Gun Type  Nozzle Size  Air Pressure 
Conventional Siphon Feed  1.2 - 1.4 mm  28-32 psi 
Conventional Gravity Feed  1.2 - 1.4 mm  28-32 psi 
Conventional Pressure Feed  0.8 - 1.2 mm at 8-10 oz./min.  28-32 psi 
HVLP Gravity Feed  1.2 - 1.4 mm  8-10 psi at cap 
HVLP Pressure Feed  0.8 - 1.2 mm at 8-12 oz./min.  8-10 psi at cap 
Caution: Application of these product systems requires recommended temperature/humidity conditions and film thickness ranges. The material, hangar, and substrate temperature should be no lower than 45°F before, during, and after application. Do not apply paint materials to surfaces less than 5°F above the dew point, or to surfaces warmer than 125°F. Substrate temperature should be minimum 45°F to maximum 125°F.

Please refer to the Adhesion Promoter Tech Data sheet for details regarding surface preparation and application.

BRAND: Quantum
Number Of Parts: One Part
Type: Adhesion Promoter
Related Items:
TotalBoat Blogs Live Tech Support