TotalBoat FixWood marine-grade epoxy putty is an easy, reliable way to repair rotted wood permanently. This 2-component, moldable epoxy putty is easy to shape in place by hand or using tools. Its non-sagging formula is great for repairing or replacing damaged or missing wood on door & window frames, deck boards and trim. It's also ideal for filling non-structural screw holes.
FixWood cures overnight to a hard surface that's easy to sand, carve, machine, or fasten.
Compatible with all types of wood, its beige color can be stained or painted so it blends with the surrounding wood species. Repairs are 100% waterproof, shrink-free & able to flex with the wood, for long-lasting adhesion & strength. Low-odor formula is great for interior or exterior use above the waterline.
Available in a 2-Pint Kit & a 2-Quart Kit. Kit includes 1 pair of lg. latex gloves.
The item was added to your wishlist.
The item was added to your shop cart.
FixWood Repairs Rotted Wood for Good
TotalBoat FixWood is great for permanent repairs to wood that's rotted, missing or damaged, especially if it's not feasible to replace the wood due to its unique shape or historic value. Just fix it in place with FixWood.
In cases of deep rot, the wood must be consolidated first so it's strong enough to accept FixWood. Use TotalBoat Penetrating Epoxy to consolidate punky or soft areas, then apply FixWood while the Penetrating Epoxy is still tacky, for maximum bonding strength.
TotalBoat FixWood Marine Wood Repair Epoxy Putty Features
Cures overnight and can be sanded, carved, or machined. No cracking or shrinking.
Can accept nails and screws just like real wood.
Cured material can be stained or painted to match surrounding wood species.
Compatible with all types of wood.
Flexes with the wood, without shrinkage or cracking.
Solvent-free formula has no noticeable odor and no VOCs.
For interior and exterior use above the waterline.
Kit Item Number
1 pint resin & 1 pint activator
1 quart resin & 1 quart activator
Acetone, denatured alcohol, or lacquer thinner
Working Time (100 grams) @72°F
Tack-Free Time @72°F
Dry Time to Sand @72°F
< 6 hours
Full Cure @72°F
Wear protective gloves, clothing, and eye/face protection while using TotalBoat FixWood. Always wear protective gloves when kneading or shaping FixWood by hand. When sanding FixWood, wear protective gloves, protective clothing, face protection, and a proper respirator. Be sure to read and understand the instructions and the safety information in the Technical Data Sheet and Safety Data Sheet (SDS) before using this product.
What is shelf life of this product
I don't know, had mine for two months and it's still fine and similiarproducts I've used have been good for over a year.-----------------------------------------From: "JamestownDistributors"
will the wood to be repaired need to be dried out or can it have a high moisture %
Definitely need to dry out the wood.Keep a fan on it for an extended period followed by a blow dryer with heat.
Sorry,I do not know the answer. I have only used this product on dry wood.
The wood will need to be dry to the touch for it to stick.
JD Tech Team
Dry the wood as much as possible1
Perfect for filling wood voids.
I only give this product 4 stars because it can be difficult to work with; however, it does perform exactly as it states. Regardless of how the product looks after you form it and after its cured, it does shape very easily.
Wicomico Church, VA
Good Product Result
Once I got by the fact that Part 2 was very dry and appeared to be old, and that the process of mixing the two parts together was a challenge, the performance of the putty was quite good. It has good adhesion qualities and sanded to a smooth and durable surface. If you have wood that has deteriorated including dry rot and want a product to fill and reshape it, this is for you.
Need to use penetrating expoxy first
I tried to use this product on dried and somewhat deteriorated teak interior, and would not stick to surface. I suspect I needed to use the penetrating expoxy as suggested in directions first.
Material is a little dry which makes it more difficult to mix than the usual hole filler but works fine when applied to screw holes. Easy to sand smooth
Product was very dry and crumbly. Could not be properly mixed or spread. Had to throw it away.(I've already complained to JD)
Rotten to the core no more
Great stuff for filling a rotten board - works very easy, like modeling clay,,,
At first was a bit hard to work with as it is rather crumbly - once you get it started, however it mixes great, sands wonderfully, and takes paint like it is real wood.
At first I thought it was too dry and difficult to work with but I followed the instruction warning not to add anything to it. A second application made for a very nice job .
Overall I like the product. My only reservation is that it seems a bit dry (trouble knifing it out without it pulling the opposite side) during application. I recently bought this so it's not old on my shelf but it is possible it's a batch manufactured last year. Aside from that the product works as expected. 5 stars if the dryness is not the usual.