COVID-19 Update: We are open & shipping orders! We are working hard to ship as quickly as possible, while ensuring the safety of our associates. Please note: we have closed our Bristol retail store. Click for details
Jamestown Distributors(800) 497-0010
Click to watch the JD Search Tutorial video & learn
all about searching and browsing on Jamestowndistributors.com
TotalBoat Polyester Fairing compound is a lightweight cosmetic filler ideal for repairing minor dents, dings, and scratches in fiberglass and gelcoat. Fill pinholes, print-through, low spots, grinding/sanding marks & other surface defects. This high quality fairing material chemically bonds with polyester resins for stronger layups and maximum gelcoat adhesion.
It's creamy consistency is easy to spread smoothly, and won't sag on vertical surfaces. Low styrene content means less odor and minimal shrinkage. Best of all, it sets up quickly and sands easily.
For use above the waterline only, unless overcoating with TotalBoat TotalProtect Epoxy Barrier Coat primer. Available in Quart and Gallon sizes. MEKP hardener included.
The item was added to your wishlist.
The item was added to your shop cart.
BONUS! Each Quart and Gallon size Kit order includes 1 Plastic Spreader
Great for Filling, Fairing, and Repairing Composite Surfaces
TotalBoat Polyester Fairing Compound is easy to work with, easy to sand, and provides optimal strength. It's ideal for making quick and easy cosmetic repairs to fiberglass and gelcoat surfaces. Just mix with MEKP catalyst, apply easily with a putty knife, wait while it sets up quickly, then sand. No need to worry about measuring the exact amounts of resin, filler, and wax—we've done it for you!
This lightweight polyester cosmetic filler is primarily for use in tooling and repair applications as a fairing material only, and is not designed for high-strength repairs. For structural repairs requiring strength and dimensional stability, you can use TotalBoat Polyester Structural Repair Putty, a high-strength, fibrous polyester putty for filling larger cracks & voids. After it cures, apply TotalBoat Polyester Fairing Compound over the repaired area, let it cure, then sand to achieve an extremely smooth surface ready for gelcoat or paint.
TotalBoat Polyester Fairing Compound is for use above the waterline only, and can be overcoated with gelcoat or paint. If used below the waterline, it must be overcoated with TotalBoat TotalProtect Epoxy Barrier Coat Primer, to prevent water damage.
TotalBoat Polyester Fairing Compound Features
Optimal strength with excellent sanding ability.
Sets up quickly.
Easy to sand and feather to your existing gelcoat.
Low styrene content results in minimal shrinkage.
Less styrene means less odor!
Creamy consistency is easy to spread.
Easy to apply with a putty knife, spatula, or spreader.
High-viscosity putty won't sag on vertical surfaces.
Bonds chemically in polyester resin layups for best adhesion.
Catalyze with 1-2% MEKP to easily control working time.
Can be tinted for a more exact match with gelcoat.
Reduces the time between application and sanding, for quick turnaround.
Uses for TotalBoat Polyester Fairing Compound
Cosmetic filling on composite surfaces to repair minor cracks and dings.
Filling porosity or print-through on composite surfaces.
Repairing fiberglass molds and parts
TotalBoat Polyester Fairing Compound
Creamy, thixotropic paste
Variable. At 77°F, adding 14-16 drops of MEKP to one ounce of TotalBoat Polyester Fairing Compound will provide a working time of 10-15 minutes, and will cure in 20-30 minutes.
Dry Time to Sand
Dependent on temperature, catalyst amount, and mass of Polyester Fairing Compound. Example: 20-30 minutes for a 100g mass catalyzed with 1% MEKP @ 77°F
5.6 - 6.2 lbs./gal.
Tint a maximum of 5% with coloring agents that are safe for use with polyester resins.
Store in a cool, well-ventilated place (below 75°F).
Important Safety Information
WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
Always wear protective gloves, protective clothing, eye protection, and face protection when working with TotalBoat Polyester Fairing Compound. Personal protective clothing should include appropriate gloves, safety glasses or goggles, a proper respirator, and a proper apron or similar protective clothing. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking. Only use outdoors or in a well-ventilated area. Store in a cool, well-ventilated place (below 75°F). Do not handle until all safety precautions have been read and understood.
Polyester resins have a limited shelf life and will, over time, harden in the container without the addition of catalyst. Shelf life is dependent on a number of factors such as product formulation and storage conditions. As a general rule, the shelf life for uncatalyzed polyester resins should be up to 6 months when stored in dry, cool conditions below 70°F. Warm to above 60°F before use.
Number Of Parts:
I would like to know if the polyester fairing compound is ok to use over dried laminating resin (with shredded mat) I used ? I made a repair above the water line and now need to fair and gelcoat. Thanks
Yes. For fine fairing applications such as small scratches or small cavities less than 1/8", sand the substrate with100-180 grit sandpaper. For larger areas and deeper crevices more than 1/8" deep, sand the area with 60-80 grit sandpaper. Then remove all sanding residue.
can this be applied over the system epoxy primer?
Yes, sand the primer with 80 grit first, clean with acetone, then apply.
JD Tech Team
I was told that I could use this product above & below the water line. After applying the product and sanding, I could gelcoat over without any other steps needed. True or false? I turned the boat upside down to work on the bottom. I'm repairing along the keel of boat. Which is fiberglass and stainless steel. I also was told this product would work well over as long as I sanded first with 60-80 grit sand paper and then gel coated. Also could I just get more MEK? To count 14 drops for 1 once of compound. I've used a half bottle of MEK to 1/4 of a gallon of compound. Just working on the transom I replaced. I'm just confirming everything before I do all this work incorrectly. Thanks
Hi, I recently bought some of this same stuff.before I applied I sanded with some 40 grit to get a rough profile.and yes you can directly gel coat over, that's what I did.Â I would make sure you use good filling procedures and do more than a few thinner coats in lieu of one thicker.sand your final profile with 80 grit and gel away.I had no issues.
This product is to be used above the water line ONLY.? Your projectrequires Total boat epoxy with a a silica filler.Good luck,Jack
We do sell more MEKP, but that seems like an awful lot of MEKP for 1/4 of a gallon of compound. Please call one of our techs at (800) 497-0010, it sounds like there are a lot of variables in what you are trying to achieve, and depending on the type of boat, keel, etc. When using this product, you can apply it a little shallow (by 1/16"-1/8") and before it has cured apply gelcoat over it to form a chemical bond with the gelcoat. Then wet sand and buff.
JD Tech Associate
Can this be used over epoxy?
You can use this product for light fairing over epoxy, but the surface must be abraded to give the Polyester Fairing Compound some 'tooth' to adhere to.
JD Tech Associate
My boat has an epoxy based paint surface, two part paint on it. There are some cracks in the paint, some chipping. Will this product work to fill and smooth the surface? How well does it stand up ? The hull is ferro-cement.
An epoxy based fairing material should be used to fix this problem. It is also more important to verify that it is just the paint failing and not caused by another issue. This Polyester Fairing Compound holds up great, but any fairing material, regardless of resin type needs to be protected from the UV.
JD Tech Associate
Going to continue using is product
Very easy to apply, drys hard but sands easy. Awesome product.
i would buy this product again and will most likely
very easy to work with !!
Easy to work.
Long Beach CA
I would buy this again.
Very easy to use
Boot Key Harbor
Still a fan of Total Boat products
Got too hot here before I had a chance to use it. Today's high will probably be about 100 decrees. It might cool down for a short time before summer really hits. But it may be October before I can finish this project. Notwithstanding that, I am totally sold on Jamestown and Total Boat products.