Epifanes Teak-O-Bello is an easy-to-use protective coating that keeps renewed teak and other hardwoods looking better longer. Its eco-friendly, water-based formula has no toxic fumes, and will not damage the polyurethane or polysulfide caulking used in teak deck seams.
It also prevents weathering, graying, mold, and mildew much longer than solvent-based teak wood sealers and teak oils. In addition to teak decks, Teak-O-Bello is ideal for maintaining the color and beauty of teak railings, furniture, tables, hatch covers, and other items.
This unique, VOC-free, solvent-free coating is available in a 500 ml bottle.
For best results, clean and recondition wood with Epifanes Teak-O-Clean & Bright (sold separately) before applying Teak-O-Bello.
The item was added to your wishlist.
The item was added to your shop cart.
Gives cleaned and brightened teak extended protection against weathering to keep it looking better, longer.
Water-based, environmentally friendly formula contains no solvents, VOCs, or toxic fumes.
Solvent-free formula will not harm polysulfide or polyurethane deck caulking.
Provides longer-lasting protection than solvent-based teak oils and teak sealers.
Unique formula is highly resistant to mold formation.
Quick and easy to apply.
Suitable for use in fresh and salt water marine environments.
For interior and exterior use.
Fresh or salt water. For interior and exterior use.
Clean, dust-free, lint-free cloth or rag
For lighter coloring, dilute with tap water.
Recommended Number of Coats
Drying Time Between Coats
30 minutes (at 65°F)
40 sq. ft. per 500 ml bottle, depending on application method and roughness of surface.
Apply a fresh coat at least once annually.
Store away from direct sunlight, in a frost-free area.
Instructions for Use
Before using this product, clean weathered teak thoroughly with Epifanes Teak-O-Clean & Bright, as directed, and allow to dry thoroughly. Sand surface before applying Teak-O-Bello.
Before use, shake the bottle of Teak-O-Bello for at least 1 minute to mix the product thoroughly.
Use a dust-free cloth to apply a thin coat of Teak-O-Bello to the surface.
Allow to dry for 30 minutes.
Apply a second thin coat. It's important to apply thin coats to avoid film building.
Remove excess product from caulked seams in teak decks.
Before using this product, read and understand the information on the label and in the SDS (safety data sheet). May irritate skin or eyes. May cause serious injury if ingested. Avoid contact with skin and eyes. Be sure to wear appropriate personal protective equipment including protective gloves, eye protection, and skin and clothing protection when using this product.
Number Of Parts:
Will it go over Tip Top Teak Oil
Not familiar with Tip Top Teak Oil, best to sand down to bare wood and apply.
JD Tech Team
Will the surface be slippery, or slippery when wet, if using teak that will be walked on?
It shouldn't be too slippery when wet, it sinks into the wood, not like a varnish or oil finish.
JD Tech Team
Rehabbing a 1970 58 Foot Trumpy. The aft teak deck was pretty dirty but not worn out. Cleaned, cleaned it again, did some bleaching then gave it a light sanding. Applied one coat of Teak-O-Bello. They direct you to apply two, I think to get rid of the shading variations. Ran out of product so did not get a chance to do 2nd coat as directed. (30 minutes after the 1st coat) I am hoping that a second coat applied 2 weeks later will come out OK. This product seems great for a semi-protected (indoor) deck. I'm not sure how it will work on exterior teak decks at this point.
I finally got some time to work on the teak interior of my Pearson 27 last week. I shook well and opened the container and poured a thin, very darkly stained liquid on the applicating cloth. The cloth immediately turned a very dark brown. The whole interior of my boat is a slightly dark, honey color that I really like. Maybe it won't darken the surface very much, so I'll try a panel in the aft cabin that is over the engine compartment. It applied nicely, covered well and was dry when I returned in 30 minutes for the 2nd coat.When I came by the next morning, if found that the dark stain indeed turned my honey teak quite dark. The resulting finish was very even and extremely flat â€¦ dusty wood flat. I can deal with the flat, but the color is not how I like my teak to look. Is this finish available in a clear? Any thoughts to getting a soft gloss to it?
Vero Beach, FL
I am very likely to use this product again
As with the cleaner, this is the fourth product I have used on the teak deck in my cockpit. It went on easily and while a bit messy was easily cleaned up. I am happy with the finish. The real test will be how long it lasts. Previous products has not made it past three months. This one says to apply annually. If it lasts even close to a year it would be a grand slam. I will be happy with anything beyond six months.