Pettit Unepoxy HRT Antifouling Paint replaces unepoxy standard and copper guard single season paints
Pettit Z-Spar Pettit marine paint
  • Pettit Unepoxy HRT Antifouling Paint replaces unepoxy standard and copper guard single season paints

Pettit Unepoxy HRT Antifouling Paint

Unepoxy HRT is a new single season antifouling paint that replaces Pettit Unepoxy Standard and Copper Guard. 24% Copper content provides reliable protection, and its smooth, durable finish is designed to withstand a full season of beaching and trailering.

Hybrid Reactive Technology formula utilizes high-density biocide and film modifiers for better color consistency, less yearly build-up (less sanding), and lower finish weight, while providing a smoother finish than traditional paints.

Compatible over most bottom paints and on properly prepared fiberglass, and steel hulls. Not for use on aluminum. Get the performance of traditional ablative paints, with the durability of hard modified finishes.

Available in Gallons, in your choice of Blue, Green, Red, or Black. Black and green also available in quarts.

Black  
IN STOCK - Available for pickup
$35.33 / qt
qty.   
$35.33
$35.33
$105.76
$105.76
$105.76
$105.76
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Unepoxy HRT Antifouling Paint Features:

  • Economical single season antifouling paint
  • HRT formula reduces buildup for less sanding, and lighter finish weight
  • Up to 25% better coverage than traditional paints
  • Smooth durable polishing finish
  • Compatible over most bottom paints
  • Durable finish withstands beaching and trailering

 

Finish:  Flat 
Solids by Volume:  42% 
VOC:  475 Grams/liter (3.95 pounds/gallon) 
Biocide:  Cuperous Oxide (23.7%) 
Flash Point:  >105℉ 
Aplication Method:  Brush, roller, airless, or conventional spray 
Maximum Roller Thickness:  3/16" 
Number of Coats:  1 minimum per season with additional coat at waterline 
Wet Film Thickness  3.5 mils 
Dry Film Thickness  1.5 mils 
Application Temp:  50℉ Min / 90℉ Max 
Thinner  120 Brushing Thinner 
Dry Time  To Touch  To Recoat  To Launch 
90℉  15 mins  1-1/2 hrs  6 hrs 
70℉  30 mins  3 hrs  10 hrs 
50℉  1 hr  6 hrs  16 hrs 
DO NOT USE THIS PRODUCT ON ALUMINUM HULLS AND OUTDRIVES.
WARNING: Pettit Unepoxy HRT paints can expose you to chemicals including talc, Ethylbenzene, Titanium dioxide, and cumene, which are known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov
BRAND: Pettit Z-Spar
Type: Copper AF Paint
Related Items:
TotalBoat Blogs Live Tech Support