Pettit Odyssey is a multi-season ablative antifouling compatible over most bottom paints
Pettit Z-Spar Pettit marine paint
  • Pettit Odyssey is a multi-season ablative antifouling compatible over most bottom paints

Pettit Odyssey HD Antifouling Paint

Odyssey HD is a multi-season ablative antifouling that combines high copper content with controlled polishing, for a durable finish suitable for use on power and sailboats in all waters. Compatible over most existing finishes, this bottom paint lets you haul and relaunch without losing effectiveness. Minimal buildup leaves surfaces clean, smooth, and ready for next season, without heavy sanding.

50 State VOC-compliant formula features fast dry times to let you launch in as little as four hours. Odyssey HD is Pettit's suggested alternative if you've previously used Pettit Horizons, and is covered by Pettit's new HD (Hull Defense) 18 month manufacturer's limited warranty.

Available in Gallons in Black, Blue, Dark Blue, Red, and Green. Black and Blue are also available in Quarts.

Note: Do not apply Odyssey HD on aluminum hulls and outdrives.

 
IN STOCK
$220.05 / gl
qty.   
$220.05
$220.05
$220.05
$220.05
$220.05
$70.35
$70.35
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

2020 Pettit Adventure is Calling Mail-In Rebate Program

Purchase up to two (2) gallons of Pettit Odyssey HD antifouling paint between March 1, 2020, and September 30, 2020, and save up to $20 via manufacturer's mail-in rebate. See the 2020 Pettit Adventure is Calling Mail-In Rebate form for complete details.


APPLICATION INFORMATION
Odyssey HD contains cuprous oxide. As a result, there is a tendency for settling to occur, especially if the paint has been on the shelf for several months. It is necessary to thoroughly mix the paint before using. If possible, shake the can of paint on a mechanical paint shaker. Before using, check the sides and bottom of the can to make sure all the pigment has been mixed in. If mixing is going to be done with a wooden paddle or an electric drill mixer, pour off half of the liquid from the top of the can into another can and then properly mix in any settled pigment; then remix the two parts together thoroughly.

Adhere to all application instructions, precautions, conditions, and limitations to obtain optimum performance. Refer to individual labels and tech sheets for detailed instructions when using associated products, etc. When spraying, do not thin Odyssey HD more than 10% (12 ounces per gallon) or inadequate paint film thickness will occur and premature erosion of the finish will be likely.

SURFACE PREPARATION
Coating performance, in general, is proportional to the degree of surface preparation. Follow all recommendations very carefully, avoiding any shortcuts.

MAINTENANCE
No antifouling paint can be effective under all conditions of exposure. Man made pollution and natural occurrences can adversely affect antifouling paint performance. Extreme hot and cold water temperatures; silt, dirt, oil, brackish water and even electrolysis can ruin an antifouling paint. Therefore, we strongly uggest that the bottom of the boat be checked regularly to make sure it is clean and that no growth is occurring. Lightly clean the bottom with a sponge or cloth to remove anything from the antifouling paint surface. Cleaning is particularly important with boats that are idle for extended periods of time

Features:

  • Fast dry, VOC compliant standard for boatyards
  • High-copper ablative protection in all waters
  • Smooth polishing finish prevents buildup and sanding
  • Compatible over most bottom paints
  • Covered by Pettit HD (Hull Defense) 18 Month Manufacturer Limited Warranty

Technical Specifications

  • Finish: Flat
  • Curing Mechanism: Solvent Release
  • Solids (theoretical): Weight- 75, Volume- 50
  • Coverage: 475 sq. ft/gal.
  • VOC: 330 g/l max.
  • Flash Point: 105 Deg F
  • Application Method: Brush, Roller, Airless or Conventional Spray
  • Number of Coats: 2
  • Dry Film Thickness per Coat: 1.6 mils
  • Application Temp: 50Deg F. Min., 90Deg F. Max.

 

Dry Time Hours  To Recoat  To Launch 
90° F.  1-1/2 
70° F. 
50° F  16 
BRAND: Pettit Z-Spar
Type: Copper AF Paint
Related Items:
TotalBoat Blogs Live Tech Support