Trailer Bunk Boards Guide your boat safely in high winds or strong currents. Marine grade carpet cradles your boat, protecting it from scratches and dings. All hardware is hot dip galvanized for corrosion protection, and fits frames up to 4-1/4" in size. Mount 21" above your trailer frame and have 13" of side movement on each side. Sold in pairs with all hardware included. Available in 2ft and 5ft lengths.
This item is no longer available.
The item was added to your wishlist.
The item was added to your shop cart.
Sold In Pairs
Tie Down Marine
What is the quality on these bunks?
Get the long one. If your boat is as heavy as mine and 21 ft. Texasmade with a 60 HP. Mercury at 250 Lbs. plus stern weight.
I found the quality to be quite good, easy to install, plenty durable and easily adjustable. I only had the boat trailer for about 2 years after mounting them, but had no negative issues with them.
I installed them almost 3 years ago and they look like new. The quality is excellent. They were easy to install. I'd recommend them.
what i the avrage size of a bunk board?
From what I know 2' to 4' - I installed the 2' length boards on my trailer, just behind the fender to guide the bow on when loading and to center the stern when pulling out of the water and they accomplished what I needed for my 18' boat.
Could be better
Guides are good, except the brackets are too thin and very weak. They bend when tightened and don't hold well at all. I made my own replacement brackets.
I would recommend it.
Install took less than half an hour and was simple. I have a 20' boat and this works perfect when loading the boat on windy days. Built of durable material and should hold up for years.