Super Lube Hub Kits by Tie Down Engineering The biggest feature of Tie Down Engineering's Super Lube Hub Kit is as new grease is pumped in, old grease is forced out! These hub kits include bearings, seals, dust cap, cotter key, and lug nuts or bolts. Replacement hub kits are also available for most boat and utility trailers.
This item is no longer available.
The item was added to your wishlist.
The item was added to your shop cart.
All kits include: bearings, seals, dust cap, cotter key, and lug nuts or bolts. SUPER LUBE Kits are Factory pre-greased, and also available in galvanized and no grease or preassembly.
5 Stud UHI
1 each 1-1/16 in and 1-3/8 in w/ Lug Nuts
Tie Down Marine
How to tell which kit I need...81035 or 81036 for boat trailer without removing a lug
the spindle for the 81035 is a straight 1" spindle, while the 81045 is for 1-3/8" BY 1-1/16" tapered spindles. You may be able to get a caliper on the spindle without removing lugs, just pulling the dust caps.
JD Tech Associate
So, is this one hub or two per "kit"?
I orderedtwo hubs complete and two spindles
One hub per kit
dear Sir, Madam, what is the shaft diamater - I am after hubs to fit 25mm shaft. Also does this unit have a seal at the back?
Great hub - Difficult cap
This is a great design with the grease fitting on the inside bearing. The original bearings on my trailer on the inside bearing because the grease from the bearing buddies never made it too them.The only negatice on these is the hub cap. It was way too tight and difficult to get on. I had to file and edge on them to get them on.