The West System Vacuum Bagging Kit is a complete starter system for room temperature repairs and small laminating projects up to 13 square feet.
Included are a venturi vacuum generator, 3 vacuum cups, 10 ft 1/4 inch (inner diameter) vacuum tubing, vacuum gauge, 2 junction T barbs, 15 square feet of West System release fabric, 15 square feet of breather fabric, 15 square vacuum bag film, 25 ft of vacuum bag sealant, and complete instructions.
The item was added to your wishlist.
The item was added to your shop cart.
Vacuum Bagging Supplies
Can I vacuum bag the transom of my boat?
At this time we do not have a customer to answer your question. If you need assistance please contact customer service at 800-423-0030.
Bagging kit OK
We used the kit to make a v-tail for a UAV, a small fiberglass compartment to hold equipment in a UAV , an ogive tailcone for a UAV. We had some difficulty bagging parts over molds. We used sandwich style bagging on all of our molds and found that we probably should have used more bagging material on top. Under pressure, the bag crumpled up making it difficult to seal. Ok results though!