COVID-19 Update: We are open & shipping orders! We are working hard to ship as quickly as possible, while ensuring the safety of our associates. Send us your questions and our Total Support Team will respond by email or phone as soon as we can!
Jamestown Distributors(800) 497-0010
Click to watch the JD Search Tutorial video & learn
all about searching and browsing on Jamestowndistributors.com
BoatLIFE Teak Deck Sealant is designed for the repair of teak deck seams. A revolutionary deck sealant. This 24 hour curing system is sandable and especially designed for teak deck seams. No priming necessary. When fully cured, resistant to teak cleaners, teak oils, gasoline and diesel fuel. Tack-free in 30 minutes.
The item was added to your wishlist.
The item was added to your shop cart.
SPECIFICATIONS Teak Deck Sealant meets or exceeds the requirements of Federal Specifications TT-S-0027, Type II, and Military Specifications C-18255E (Ships), Type II.
SURFACE PREPARATION The surface must be dry, clean and free of all old caulking materials. Cut back weathered surfaces or rot by routing, sanding, or sawing to solid wood. Rotted wood maybe treated with "Git"-Rot. When new wood is coated with preservatives such as Woodlife, the surface must be thoroughly sanded before application. We recommend a thorough washing with an oil free solvent such as BoatLIFE Life-Calk Solvent and Cleaner or pure acetone1. If painting or varnishing is desired, it must be done prior to applying BoatLIFE Teak Deck Sealant.
JOINT EXPANSION It is recommended that dimensions be established for each joint in conformance with service conditions. Width of joint may be determined by calculating expansion and contraction of limits of the structure during temperature extremes and multiplying by a factor of 4. For example, if a joint will open and close 1/4" under temperature extremes, the joint should be designed 1/4" times 4, or 1" wide. No joint should be less then 1/8" wide.
CAUTION: DO NOT OPEN CONTAINER UNTIL READY TO USE
1. Clean surface and wash with Life Calk Solvent & Cleaner or pure acetone.
2. Application of bond breaker is recommended.
3. Apply Teak Deck Sealant with a hand or air operated caulking gun, putty knife or trowel.
4. Tool seam.
5. Sand after 24 hours. (Do not use an orbital or oscillating sander. A belt sander is recommended.)
Base Compound: Silicone
Colors: White, Black
Consistency: Gun Grade
Tack Free Time: 30 minutes
Cure Time 1/4: thickness 24 hours
Tests show no cracking, chalking, color change, or stains
Below Water Line (yes/no):
Rate Of Cure:
very short shelf life/ not recommended
Deck systems deck caulk has much longer unopened shelf life and applies smoothly compared to this. My uses were deck recaulking. I have 6 unopened cartidges that were dried out when opened in less than one year from purchase. could not use. .
Harry the deck hand
bought 3 tubes of boatlife teak deck sealant all three were bad. none of them cured stayed tacky for over a week.was almost like a soft tar goo.used them in my teak hathes had to spend an afternoon trying to clean up the mess it left . maybe just a bad batch!!
minnisotte beach nc
Am buying again...
This applied smoothly and left professional looking seams. My boat is in Puget Sound, WA so weather windows for this type of work are iffy at best. This applied quickly, dried quickly. I recaulked the entire foredeck of my 38' sailboat 4 years ago and couldn't be happier with the results. Ran out and had to go to another caulk to finish. I'm now reordering because the other caulk has failed, but the BoatLife Teak Sealant still looks like it was done this season.
IN ONE WORD "MISERABLE"
No matter how this stuff is approached it is nearly impossible to work up a technique to give a professional look. NO CONSISTENCY AT ALL It fills at different Uncontrolable heights when plastic putty knife is used to lay it flat. Nearly impossible to not leave marks in the surface.