System Three SculpWood Epoxy Putty
System Three System Three
  • System Three SculpWood Epoxy Putty
  • System Three SculpWood Epoxy Putty

System Three SculpWood

SculpWood is the moldable epoxy putty component of The System Three EndRot System. SculpWood is a 2-component, solvent free, kneadable epoxy resin that's moldable, carvable, lightweight, strong, and exhibits excellent adhesion to a variety of substrates. It is easily sanded and will accept paint, screws and nails. It is most commonly used in conjunction with System Three RotFix, a low viscosity wood sealer.
This item is no longer available.
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
    Technical Specifications
  • Mix Ratio by Volume: 1:1
  • Mix Ratio by Weight: 1:1
  • Total Solids: 100 percent
  • Mixed Color: Brown
  • Pot Life at 77 degrees F: 1 Hour
  • Tack Free Time at 77 degrees F: 6 Hours
  • Use protective gloves when working with this product. Use soap and water or white vinegar to get it off of your hands. Use Denatured Alcohol to clean off your tools.

    BRAND: System Three
    Strength: Weak
    Type: Wood Caulk
    Usage: Woodrot
    4.9 7

    Works well,east touse.

    5

    Repairing the roof of a railway passenger car prior to covering with rubber roofing.Lots of rot and holes to fill.System works well.

    Restorer

    Ottawa, Canada

    Yes

    Great product!

    5

    Good stuff!

    Andy45cal

    Wisconsin

    Product works as advertised.

    4

    I used the product to repair rot on my garage door jam. The product worked well.

    JB

    Louisville, KY

    Yes

    Use the right product for the job!

    5

    This stuff is easy enough to use for minor repairs and crafts. I would NOT use it for structural purposes. I would mix my own blend of epoxy, silica, wood flour, and maybe a bit of chopped strand for structural work. Or maybe a bit of xxWeld. My wife uses this stuff for her gourd art. Be careful mixing it though. If you mix it to long it liquefies and limits its usefulness. System Three has always been very helpful when I have had problems.

    Woodenboaty

    PHOENIX, AZ

    Yes

    Very good product

    5

    Easy to use, does job well

    itlions

    Rockville MD

    This product is a must have

    5

    A key part of System Three End Rot system. I have repurchased many times. Gives great finished results when used/mixed with their 2 part clear epoxy sealer to give a better workability. Product by itself is not messy to use but to get good flow and workability in many applications need to mix with their clear epoxy sealer. I would not tackle dry rot problems without this one.

    Dryrot king

    Allentown, Pa

    Yes

    Great product

    5

    My house was built in 1820 and many of the window sashes and well as window sills needed a bit of attention. SculpWood has is an amazing product. It's easy to use and sands beautifully. I never write reviews but this product is truly great. When you are able to take something that looks as though it should be ripped out and replaced with new material, and make is look new again by using sculpwood...well, needless to say I was very impressed with this stuff. I have a block of it sitting on computer.Travis

    travisc

    Louisville, KY

    Yes

    System Three SculpWood

    4.97

    100.0

    Related Items:
    TotalBoat Blogs Live Tech Support Jamestown Forum Free Catalog