System Three - Epoxy Resin and Hardener - Plunger Pump Set
Plunger Pump Set screws onto System Three epoxy containers and delivers 1 oz. per stroke for resin and a 1/2 oz. for hardener. Easy dispensing and accurate mixing. System Three Pump set fits the gallon, quart, and pint containers.
The item was added to your wishlist.
The item was added to your shop cart.
Pumps are to be used with:
System Three General Purpose Epoxy Resin, Fast, Medium, and Slow Hardeners.
System Three Clear Coat Epoxy System
System Three Mirror Coat
System Three SB-112 Epoxy
System Three Laminating Resin
Will this work on with System Three T-88 Epoxy?
No. From the System Three site: "Mustard" pumps that dispense material from our 16oz - Gallon containers. Can be modified for 2.5-gallon and 5-gallon containers. Not recommended for measuring. (Doesn't work with Quick Cure, T-88, GelMagic or MirrorCoat containers.)
Yes. But you will omit installing the little spacer in one of the pumps ( designed to give you a 2 to 1 ratio. ) T-88 is a 1 to 1 ratio. Take both pumps and use right out of the bag.
Haven't used the plunger set with T-88.Check with System 3 website.
The T-88 epoxy is great. The plungers are not. T-88 is to thick for their size and so much force is needed (even with warm bottles) that the jug collapsed As it's 1 to 1 it's easier and faster to pour.
Plungers make it so easy to measure out liquid I can't imaging having to pour them out to manually measure.My only issue is with the extension into the liquid. They extension tubes are kind of a hassle to deal with since they aren't marked.Over all I am glad I made this purchase.
Chapel Hill, NC
Excellent tool for measuring resins
I mark the tubes in quarters to measure out smaller doses. It has worked flawlessy for years.