Forespar Marelon Flanged Seacocks
Forespar Forespar
  • Forespar Marelon Flanged Seacocks

Forespar Marelon Flanged Seacocks

Marelon - Marine Grade Seacocks are optimized for marine use above and below the waterline with maximum UV inhibitors, and it will not support combustion. Additional marine benefits of the material are its extreme range of operating temperature and its resistance to abrupt changes in temperature.

 
IN STOCK - Available for pickup  
$42.63 / ea
qty.   
$42.63
$95.24
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
Item Number  Thru-Hull  Hose Barb  Base  Height 
FOR-904010  3/4"  3/4"  3"  3" 
FOR-904011  1-1/4"  1-1/2"  6"  5" 

New stem/handle design permits 180° rotation for opening in either direction.

VALVE MAINTENANCE:

All our valves are non-corrosive, but like any moving part in a marine environment, they required regular inspection and lubrication. Do not fail to actuate the handle and lubricate the seals on a regular schedule (water pump grease or even mineral oil will lubricate seals).

Bottom and top connections are NPS (straight) thread. The use of products with NPS (straight) pipe thread is recommended only for low pressure applications, and then only with a generous application of pipe sealant or PTFE thread tape.

All critical hose connections should be double clamped at both ends. Ideally, the hose clamp screws should be mounted opposite one another for maximum security. Use the highest quality AWAB hose clamps for longest life and best performance.

Marelon Advantages

  • Non-corrosive
  • Non-conductive
  • Fire resistant
  • Impact resistant
  • Temp. range is -40 to +176°F
  • UV resistant
  • Marelon is a formulation of glass-reinforced Dupont Zytel

 

BRAND: Forespar
Material: Marelon
Type: Seacocks & Ball Valves
3.5 2

Lubricate

3

I recently bought a J105 with these Seacocks. It seems that the previous owners did not operated the seacocks for years. I currently have the boat in freash water and would like to lubricate the seacocks while the boat ius in the water. Is this possible?I also have had a problem with one of the seacocks. While I was opening it, I end up with the handle in my hand. The seacock remained closed. How can I address this problem?

Marcelo

Chile

Yes

Excellent long life seacock

4

Marelon is a good substitute for bronze seacocks. It is unaffected by electrolysis- so there is no need for a bonding wire. Also, corrosion of any kind is not a problem. A light lube from time-to-time is all the service needed.

PaulM

Portsmouth, RI

Yes

Forespar Marelon Flanged Seacocks

3.52

100.0

Related Items:
TotalBoat Blogs Live Tech Support Jamestown Forum Free Catalog