Wagner Heat Gun HT1000 replaces the Milwaukee 1220HS
Wagner Wagner tools
  • Wagner Heat Gun HT1000 replaces the Milwaukee 1220HS

Wagner Heat Gun

The affordable Wagner Dual HT1000 general purpose heat gun has two heat settings and heats up quickly to let you put the right amount of hot air just where you need it to remove paint, putty or caulk, thaw frozen pipes, bend plastic pipes, shrink plastic film for weatherproofing or wrapping, soften adhesives under floor tiles, and much more.

The lightweight, heat-resistant plastic body fits comfortably in your hand and won't tire your arm during extended use. This compact, highly effective tool is a real time saver and is offered at a price that won't burn a hole in your bottom line.

 
IN STOCK - Available for pickup  
$24.99 / ea
qty.   
$24.99
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content
The Wagner HT1000 is the same high-quality product with the same reliable performance as the Milwaukee Heat Gun. Our supplier has informed us that the Milwaukee 1220 was in fact a relabeled Wagner product to begin with, and has been discontinued. You can expect equivalent features and performance from the Wagner 1000 heat gun.

See the Product Data Sheet link at left for recommended temperature settings needed for various purposes.

Safety Notes: : Always set the heat gun upright after turning it off, either for a short break or for storage. Avoid laying the unit on its side after shutdown. The heat will remain in the unit and cooling will take longer. Store the heat gun ONLY after the nozzle is cool. To prevent accidental startup, unplug the heat gun before storing.

Features

  • Two temperature settings provide the right amount of heat for your particular project
  • Lightweight heat gun won't tire your arm during extended periods of use
  • Durable, heat-resistant, high-impact plastic body is made for heavy-duty use
  • Corrosion-resistant nozzle prevents rust
  • Two fan speeds, both designed to provide relatively low noise
  • Convenient attached hook for hanging

 

Technical Specifications   
Watts  1200 (High), 650 (Low) 
BTUs  4100 (High) 
Temperature Settings  750°F and 1000°F 
Weight  1.6 lbs. 
BRAND: Wagner
Type: Heat Gun
3.7 3

REVIEW SNAPSHOT®

by PowerReviews
Wagner Heat Gun
 
3.7

(based on 3 reviews)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (1)

  • 1 Stars

     

    (0)

67%

of respondents would recommend this to a friend.

Reviewed by 3 customers

Displaying reviews 1-3

Back to top

 
5.0

Perfect for post repair

By Humble Hank

from Scottsdale Arizona

About Me Avid Do-It-Yourselfer

Verified Buyer

Pros

  • Compact
  • Easy To Use

Cons

    Best Uses

    • Home Repair
    • In The Workshop
    • In The Yard

    Comments about Wagner Heat Gun:

    I replaced an older version of this product that was at least 10 years old after I accidently let the power cord lay on the hot nozzle. Initially I bought a larger more expensive model that had a rotating dial to control the temp. It was larger and quite a bit heavier. As my current project was to strip eight wooden posts about 10 feet tall taking 8-10 hours each, the heavy gun was very tiring to use. In addition the heat control was constantly being turned down and it was difficult to use in confined areas. So I searched on line for the type of gun I had before and bought another one.

     
    2.0

    Smaller and less powerful than expected,

    By Georgieb

    from Cooperstown ny

    About Me Professional

    Verified Buyer

    Pros

    • 2 Heat Settings

    Cons

    • Small Cone Of Heat
    • Underpowered

    Best Uses

    • Lightweight Projects

    Comments about Wagner Heat Gun:

    For more than 20 years I have used Makita heat guns and I looked at this Milwaukee because I needed a replacement since I have worn mine out my Makita, they no longer make them, and I can no longer get the parts to rebuild them. I had hoped the Milwaukee would be a good replacement but was quite disappointed. In the catalog it looked quite similar to a Makita, but in reality it is much smaller. The Milwaukee claims to put out the same amount of heat, and it might, but it puts it out in a much smaller circle, or concentration, of heat. This requires that I move the heat gun constantly. If I had not had many years of experience with a larger yet still lightweight powerful gun I may have been happy with the Milwaukee, but I am a professional painter and finisher, and this is not a professional quality gun. Don't get me wrong about the value of this product. It does not cost very much and it may perform just fine for many years if not really worked hard. I own many Milwaukee tooks, some more than 30 years old. Unfortunatley the old stuff appears to be of a much higher quality than this gun. If you buy this gun I hope you enjoy it. Just don't expect a lot out of it. I am probably expecting it to be much better than the Milwaukee name would imply.

     
    4.0

    great paint stripper

    By MIKE

    from WISCONSIN

    About Me Casual Do-It-Yourselfer

    Pros

    • Easy To Store
    • Easy To Use
    • Good Grip
    • Powerful

    Cons

      Best Uses

      • In The Workshop

      Comments about Wagner Heat Gun:

      I STRIPPED 1/2 OF A PAINTED BOAT BOTTEM WITH 3 COATS OF PAINT IN 1/3 LESS TIME THAN IT TOOK FOR THE OTHER 1/2 USING CHEMICAL STRIPPER. THE GALLON OF STRIPPER COST ABOUT THE SAME AS THE HEAT GUN AND WITH THE GUN THERE IS NO RESIDUE.

      Displaying reviews 1-3

      Back to top

      Related Items:
      JD on Facebook Live Tech Support Jamestown Forum Free Catalog