This is the 3M suggested set-up for spray painting, lacquer, enamel, and pesticides. This reusable kit includes a 6200 half mask respirator and two 6001 organic vapor cartridges, four P95 filters, two 501 filter retainers. It is NIOSH/MSHA approved. Size Medium.
The item was added to your wishlist.
The item was added to your shop cart.
Half Mask Respirators
What filters do I need for spraying lacquer if I purchase a 3m7500?
I usually get the P95 filters, the ones that come with the kit. Those are designed for organic vapors.
I would expect a manufacturer to say on the label whether or not you need a filter rated for organic compounds or not. My guess is probably yes.
Needed a respirator with a pre-filter for sanding uncured epoxy, as well as provide protection while working with epoxy. It provides a good fit, comfortable to wear even during warm weather.
A must have
Don't even think about using epoxy primer or bottom paint with this. That stuff is dangerous - spend the money and buy the right protection. It worked well, was easy to assemble, and best of all easy to breath through. I found this much easier to breath with than the cheap paper masks I had bought for sanding.
Lightweight, very comfortable
I've used several respirators for my projects in the past. The 3M line is by far the best I've used.
will never switch resperator
i spray woodworking finishes and this masks works. i even recommend it to fellow woodworkers.