Toon-Brite Protective Clear-Coat keeps hulls shining while adding corrosion and wear protection. Formulated for metal and fiberglass hulls, this clear-coat will not crack, chip, or peel.
Makes future cleaning much easier and reduces required maintenance. Protects against oxidation, stains, salt sprays, and electrolysis. Available in 12oz. aerosol cans. 1 gallon covers approximately 800-1200 square feet.
The item was added to your wishlist.
The item was added to your shop cart.
Description says 1 GALLON covers 800 plus square feet...sold in 12 oz cans....would I need 10 cans ($250) to do my boat.......I usually get a Bristol Harbor mustache on my boat after a few weeks in the water....do you think this product would prevent it?
I don't see much information on this product but may be worth a try.
JD Tech Team
I have a rub spot on the side of my boat. When u have the boat out of the water, u can notice it. It's a rub mark only. Looks like the clear coat rub off. Do u think this would give the shine and protection again?
Definitely would work. I have used this on my own boats and even some carbon fiber ATV fenders which see a lot more rough use than a boat, and the finish/shine is holding up great after 3 yrs of use.Side note - if you do 4-5 coats of this spray (w wet sanding in between coats) it will build up enough of the spray that you can buff it when needed.This clear coat is very shiny.
Can I use this spray on a small area on my fiberglass rowing shell to protect a small area that the paint has rubbed off on?
I'd say yes but what I used it for was to give my bass boat a shiny hard coat and I really didn't get that result. I plan on waxing and buffing it soon and hopefully I will get what I was looking for
NOT TESTED YET [...]
we are going to use this on two aluminum scultpures. to keep the shine from a dulling gray.