These watertight, plastic plugs and sockets from Hella are designed for exterior or interior installation, and feature silver plated contacts. The socket also includes a plastic cap to cover it when not in use. The plug will fit cables up to 8mm in diameter.
Two, three and four pin plugs and sockets are made for flush mounting, call for screw terminal installation and have a maximum capacity of 16A at 12V. The seven pin plug and socket is designed for surface mount, uses solder terminal and operates at a maximum capcity of 10A at 12V. All models feature an impact resistant, black plastic housing.
This item is no longer available.
The item was added to your wishlist.
The item was added to your shop cart.
12V Plugs and Receptacles
are these hella connectors the ones used on the lowrance sonar units?
No, they are not the same.If you are trying to connect a Lowarance (e.g. HDS-7) to another unit (e.g. DSC VHF radio) via NMEA interface, you cannot use the plugs on the back of the Lowrance unit. You must use the attached NMEA pigtail instead. If you want to conntect pigtails, the Hella connectors will work. However,one of the plugs is designed for surface mount and is not waterproof unless this is done.
Replaced the 4-pin connectors for my old AH4000 Autohelm. Identical to original equipment, but genders are reversed. The female connector is now on the bulkhead. No significant problems in construction nor installation.
Charlotte Harbor, FL
used the item to replace 4 wire quick connect on older VHF marine radio. Like the threaded connection and screw on cover protecting dash mounted half when not in use. easy to wire but the screws for contacts were hard to access and difficult to tighten with the small flat head screw driver. I suggest a Phillips or allen head screw instead. Otherwise this product was perfect for my needs. similar items are not easy to find. I was very happy with quality.