Schaefer open base cleats feature smooth, generous radius edges that reduce line chafe and extend line life. Constructed from 316-grade stainless steel, these cleats are electro-polished to provide a strong, attractive finish. Each requires (2) fasteners for proper installation. Available in 4, 6, 8, and 10 inch sizes.
The item was added to your wishlist.
The item was added to your shop cart.
Max Line Size
4.74" (120 mm)
0.9" (23 mm)
3/8" (10 mm)
4.1 oz. (.12 kg)
1.2" (30 mm)
1/2" (13 mm)
9.0 oz. (.26 kg)
8" (203 mm)
1.5" (38 mm)
5/8" (16 mm)
1.3 lbs. (.59 kg)
10" (254 mm)
1.8" (46 mm)
3/4" (19 mm)
2.3 lbs. (1.04 kg)
Stainless Steel 316
Open Base Cleats
what is the width of the base where it attaches to a surface?
The mounting studs/bases are 7/8" wide by 7/8" length.
Can I use a bolt as a fastener on this cleat?
Yes a stainless steel machine screw will work well. Look at the chart on the web page for the size.
JD Tech Team
what's the distance bolt to bolt ?
You will find the answer in the questions tab on our site page.
can I use this cleats to attached to walls with resistance bands?
I suppose so. I presume that by "resistance bands" you are planning to use the cleats for some kind of strength training. The cleat is attached with two #10 bolts, so you need to be sure that the resistance bands are not stronger than the bolts or the wall to which you attach it.
I don't see why not. I used them as door pulls for cabinets in my outdoor kitchen.
I don't understand your question. Sorry
ROBERT HENNE JR
I don't understand "resistance bands". What walls? What is the wall material?
what are the mount holes on center?
It depends on what type of cleat you are replacing, Currently the ones purchased do not match up luckilly I have a machine shop that I can alter the holes, I am 100% sure that I measured correctly but they just are slightly off so the measurements on the site are more of a ball park than exact
1.25" on center
ROBERT HENNE JR
Beautiful, Functional Cleat
This is a good stainless cleat, well designed and beautifully made.
These were advertised as being made of 316 SS. That is not likely as mine have been rusting. None of my other cleats that were made of 316 SS have tarnished at all.
Santa Barbara, CA
very well made
I had to return items but did get refund (less restocking fee)
i would recommend other people great
Well after looking around for a while a friend of mine said try James town. So I took his advice and well the end results were great. Thank you so much james town
Very well made. Comes with gasket.
Rocky Hill, CT
Schaefer Stainless Cleat
Nice quality product. heavy duty will last for years