Marco UP3 Electric Water Pump
MARCO Marco pumps
  • Marco UP3 Electric Water Pump

Marco Electronic Water System Pumps

The Marco UP/E is an electronically regulated intelligent water system pump. The pump initiates automatically and features variable speed performance regulated by water supply demand. Electronic controlled gear pump water system does away with the need for an accumulator tank.

The Marco self priming system accepts 12/24V universal voltage. It includes check valve and easily accessed bleed screw. Variable speed maintains constant pressure and flow for vessels with multiple outlets. Two LEDs monitor pump and water supply functions. Pump is protected internally against short circuits and overloads so no need for separate fusing.

PTFE coated helical gear pumps are used for fresh water pressure systems and shower kits on boats of all sizes and yachts, offering greater lift and pressure control compared to diaphragm pump based systems.

 
IN STOCK - Available for pickup
$212.62 / ea
qty.   
$212.62
$328.70
$564.40
$817.02
$802.80
$799.24
 The item was added to your wishlist.
 The item was added to your shop cart.
Tech Spec Product Info User Generated Content

Water System Pump Features:

  • Variable Speed increases flow - No accumulator tank necessary
  • Constant control of flow, pressure, current and voltage.
  • Pump functions monitored by 2 LED Status Indicators
  • Electronic System Control functions as brain: gradual increase to optimum flow rate reduces surging.
  • Electronically Calibrated speed means proportional reduction of noise, current absorption and mechanical wearing.
  • Pump is protected against short circuits and overloads. No fuse required.
  • Samples 4 times to re-start the motor.
  • Blue LED indicating empty tank.
  • Easily accessed bleed screw to assist initial priming

 

NOTE: Pump fittings are BSP but include an NPT adapter.
Water System System  Flow Rate Gal (L)  Pressure PSI (Bar)  Fittings 
M16466015 (UP2/E)  2.6 (10)  29 (2)  3/8 inch NPT 
M16460215 (UP3/E)  4 (15)  36 (2.5)  3/8 inch NPT 
M16462215 (UP6/E)  6.9 (26)  36 (2.5)  1/2 inch NPT 
M16468112 (UP12/E 12V)  10.5 (40)  43.5 (3)  1/2 inch NPT 
M26468113 (UP12/E 24V)  10.5 (40)  43.5 (3)  1/2 inch NPT 
M16468115 (UP12/E 12/24V)  9.5 (36)  43.5 (3)  1/2 inch NPT 
Part Number  Voltage  Amps 
M16466015 (UP2/E)  12 - 24 VDC  7.5 
M16460215 (UP3/E)  12 - 24 VDC  15 
M16462215 (UP6/E)  12 - 24 VDC  20 
M16468112 (UP12/E 12V)  12 VDC  30 
M26468113 (UP12/E 24V)  24 VDC  20 
M16468115 (UP12/E 12/24V)  12 - 24 VDC  20 
BRAND: MARCO
Type: Water System Pumps
1.0 1

Poor tech support and misleading website

1

This seems to be a great pump and at least at this point would highly recommend the pump. The reason for the poor rating reflects the poor support and misleading information from Jamestown. Be aware the pump you will receive is not the pump as portrayed on their website. The gpm rating, the appearance, and the fittings are all different than the website states. Most important difference is the fittings are not NPT threads, they are BSP. If you go to Marco's website the info for this pump is correct. When I contacted Jamestown in regards to this problem they had no interest at all in investigating or making any changes. The different fittings cost me time and money to get different fittings to match the pump. The pump itself is quiet, seems to have great capacity and delivers smooth water flow. If it holds up it will be a great pump.

Mike

Ohio

true

Marco Electronic Water System Pumps

1.01

100.0

Related Items:
TotalBoat Blogs Live Tech Support